[Techtoolslist] fluke z8002 48-40 pin adapter pole position

[John Robertson]

There is a sample PP test script in the FTP archives. THere is also a 
Z8000 pod manual and an addendum (might be what you are looking for) 
up in

ftp/flippers.com under TTL/Test Equipment/Fluke/PDFs .

John :-#)#


At 10:12 PM -0400 7/13/05, tony wrote:

>just bought a fluke z8000  pod

>it has a z8002 chip in it with a adapter in the pod

>on the cable to the uut it is 48 pin according to the manual it

>should have a 48 to 40 pin adapter to go to uut

>i did not receive this with the pod does anyone have the adapter

>or plans on how it should be built manual does not cover this .

>would like to try to adapt this for use with pole position

>any help with the adapter or on using it with pole boards

>would be great or if anyone has written any test scripts

>thanks tony

>

>

>

>_______________________________________________

>Techtoolslist mailing list

>Techtoolslist at flippers.com

>http://seven.pairlist.net/mailman/listinfo/techtoolslist



-- 
John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9
Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames)
                  www.flippers.com
"Old pinballers never die, they just flip out"