From mail at nessandsteve.plus.com  Mon Dec 18 11:05:42 2006
From: mail at nessandsteve.plus.com (Larkins)
Date: Mon, 18 Dec 2006 16:05:42 -0000
Subject: [Techtoolslist] ABI boardmaster/DDI-40xp programming manual scans.
Message-ID: <002e01c722be$5facf6d0$15fde550@house>

Hello all,
I have a scan of the programming manual for the board master 4000 and DDS-40XP. I am waiting to complete a reinstallation before I attempt to convert the jpg images into a pdf document using the tip another member gave on image magic command line tools (thanks for the tip!). While I am at it I also have a manual for the 9132a memory interface pod which I will scan and send in along with the installation disk.

While I am at it I was wondering if anyone has any information on the 3pin DIN style of keyboard interface these units use as it looks to be a very useful programming language and would like to see what my DDS-40XP is capable of. I have 2 bag fulls of old chips an old arcade operator gave me but some of the chips are not in the built in library so was thinking of adding to the library.

Just another thought since the FTP site doesn't have any info on this brand of test equipment I will send in the firmware I read a while back.

I assume I send all of this to you John? Or is there another way?

Thanks

Regards
Steve

From jrr at flippers.com  Sat Dec 16 12:21:04 2006
From: jrr at flippers.com (John Robertson)
Date: Sat, 16 Dec 2006 09:21:04 -0800
Subject: [Techtoolslist] ABI boardmaster/DDI-40xp programming manual
 scans.
In-Reply-To: <002e01c722be$5facf6d0$15fde550@house>
References: <002e01c722be$5facf6d0$15fde550@house>
Message-ID: <p06230900c1a9da8b017f@[192.168.2.17]>

You are welcome to send files to the 'incoming' section of the FTP 
site. Just let me know what they are in a separate email so I can 
file them away correctly.

John :-#)#

PS - does anyone know what the file AEv2.dmg is doing in the 
'incoming' directory? Going to delete it otherwise...

At 4:05 PM +0000 12/18/06, Larkins wrote:
>Hello all,
>I have a scan of the programming manual for the board master 4000 
>and DDS-40XP. I am waiting to complete a reinstallation before I 
>attempt to convert the jpg images into a pdf document using the tip 
>another member gave on image magic command line tools (thanks for 
>the tip!). While I am at it I also have a manual for the 9132a 
>memory interface pod which I will scan and send in along with the 
>installation disk.
>
>While I am at it I was wondering if anyone has any information on 
>the 3pin DIN style of keyboard interface these units use as it looks 
>to be a very useful programming language and would like to see what 
>my DDS-40XP is capable of. I have 2 bag fulls of old chips an old 
>arcade operator gave me but some of the chips are not in the built 
>in library so was thinking of adding to the library.
>
>Just another thought since the FTP site doesn't have any info on 
>this brand of test equipment I will send in the firmware I read a 
>while back.
>
>I assume I send all of this to you John? Or is there another way?
>
>Thanks
>
>Regards
>Steve


From matt at rossiters.com  Mon Dec 18 16:40:02 2006
From: matt at rossiters.com (Matt Rossiter)
Date: Mon, 18 Dec 2006 13:40:02 -0800 (PST)
Subject: [Techtoolslist] Fluke 90 Series Manuals
Message-ID: <20061218132803.P91684@rossiters.com>

Does anyone happen to know if these are available online somewhere?  I 
have them and I'm just wondering if I should scan them in.

The two I have are:

1) 90 Series uP Board Tester - User's Manual
2) Quicktools for the IBM PC - User's Manual

Matt

From artfromny at nycap.rr.com  Mon Dec 18 18:33:57 2006
From: artfromny at nycap.rr.com (Art Mallet - Artfromny)
Date: Mon, 18 Dec 2006 18:33:57 -0500
Subject: [Techtoolslist] Fluke 90 Series Manuals
References: <20061218132803.P91684@rossiters.com>
Message-ID: <001401c722fc$fd5be6f0$37ea4142@Art>

Matt - I could use a scan - I have a few 6809 series 90 with no manuals
thanks
Art  

----- Original Message ----- 
From: "Matt Rossiter" <matt at rossiters.com>
To: <techtoolslist at flippers.com>
Sent: Monday, December 18, 2006 4:40 PM
Subject: [Techtoolslist] Fluke 90 Series Manuals


> Does anyone happen to know if these are available online somewhere?  I 
> have them and I'm just wondering if I should scan them in.
> 
> The two I have are:
> 
> 1) 90 Series uP Board Tester - User's Manual
> 2) Quicktools for the IBM PC - User's Manual
> 
> Matt
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist at flippers.com
> http://seven.pairlist.net/mailman/listinfo/techtoolslist
>


From jrr at flippers.com  Mon Dec 18 17:41:28 2006
From: jrr at flippers.com (John Robertson)
Date: Mon, 18 Dec 2006 14:41:28 -0800
Subject: [Techtoolslist] Fluke 90 Series Manuals
In-Reply-To: <20061218132803.P91684@rossiters.com>
References: <20061218132803.P91684@rossiters.com>
Message-ID: <p06230915c1acc942f090@[192.168.0.101]>

Scan away, I do not have them...it was on my to-do list. I did 
convert the VHS video tape to MPG, but its broken and needs to be 
redone.

John :-#)#

At 1:40 PM -0800 12/18/06, Matt Rossiter wrote:
>Does anyone happen to know if these are available online somewhere?  I
>have them and I'm just wondering if I should scan them in.
>
>The two I have are:
>
>1) 90 Series uP Board Tester - User's Manual
>2) Quicktools for the IBM PC - User's Manual
>
>Matt
>________________


From matt at rossiters.com  Mon Dec 18 18:57:20 2006
From: matt at rossiters.com (Matt Rossiter)
Date: Mon, 18 Dec 2006 15:57:20 -0800 (PST)
Subject: [Techtoolslist] Fluke 90 Series Manuals
In-Reply-To: <001401c722fc$fd5be6f0$37ea4142@Art>
References: <20061218132803.P91684@rossiters.com>
	<001401c722fc$fd5be6f0$37ea4142@Art>
Message-ID: <20061218155539.H96278@rossiters.com>

Ok, if they aren't already available - I'll scan them in.  In the meantime 
I put the Fluke 90 training video here.

http://games.rossiters.com/photos/main.php/v/techvideos/


Matt


On Mon, 18 Dec 2006, Art Mallet - Artfromny wrote:

> Matt - I could use a scan - I have a few 6809 series 90 with no manuals
> thanks
> Art
>
> ----- Original Message -----
> From: "Matt Rossiter" <matt at rossiters.com>
> To: <techtoolslist at flippers.com>
> Sent: Monday, December 18, 2006 4:40 PM
> Subject: [Techtoolslist] Fluke 90 Series Manuals
>
>
>> Does anyone happen to know if these are available online somewhere?  I
>> have them and I'm just wondering if I should scan them in.
>>
>> The two I have are:
>>
>> 1) 90 Series uP Board Tester - User's Manual
>> 2) Quicktools for the IBM PC - User's Manual
>>
>> Matt
>> _______________________________________________
>> Techtoolslist mailing list
>> Techtoolslist at flippers.com
>> http://seven.pairlist.net/mailman/listinfo/techtoolslist
>>
>
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist at flippers.com
> http://seven.pairlist.net/mailman/listinfo/techtoolslist
>

From jrr at flippers.com  Tue Dec 19 22:13:17 2006
From: jrr at flippers.com (John Robertson)
Date: Tue, 19 Dec 2006 19:13:17 -0800
Subject: [Techtoolslist] Fluke 90 Series Manuals
In-Reply-To: <20061218155539.H96278@rossiters.com>
References: <20061218132803.P91684@rossiters.com>
	<001401c722fc$fd5be6f0$37ea4142@Art>
	<20061218155539.H96278@rossiters.com>
Message-ID: <p06230901c1ae59b981fe@[192.168.2.17]>

Nice video work there Matt, also some other useful training videos.

Saves me from converting my MP2 file to MP4 - needed to upgrade first...

John :-#)#

At 3:57 PM -0800 12/18/06, Matt Rossiter wrote:
>Ok, if they aren't already available - I'll scan them in.  In the meantime
>I put the Fluke 90 training video here.
>
>http://games.rossiters.com/photos/main.php/v/techvideos/
>
>
>Matt
>
>
>On Mon, 18 Dec 2006, Art Mallet - Artfromny wrote:
>
>>  Matt - I could use a scan - I have a few 6809 series 90 with no manuals
>>  thanks
>>  Art
>>
>  > -----
...

From artfromny at nycap.rr.com  Sat Dec 23 15:03:26 2006
From: artfromny at nycap.rr.com (Art Mallet - Artfromny)
Date: Sat, 23 Dec 2006 15:03:26 -0500
Subject: [Techtoolslist] FS 2 Fluke 9100As one monitor 2 external keyboards
References: <64B28C6273410C4D8D7A0F06150CD4884217@mainserver.muppzlab.local>
	<01f601c711db$5b1ac6e0$c600a8c0@c62850a>
Message-ID: <001701c726cd$690317b0$37ea4142@Art>

MessageJust got this lot in and dont need it

2 Fluke 9100As, 2 external keyboards, one external monitor, looks to be 12
or 13 inch and is branded Fluke

Lot was purchased as is, working, from a vendor who also has a lot of
scopes, etc and the defective scopes were listed as such - nevertheless,
sold absolutely as is.

Ships in 3 boxes at 31# per, UPS ground.  No charge for packing and
handling, I never really unpacked the boxes.  Overseas shipping available
but its going to be expensive - I use Global Priority only, don't trust air
or surface parcel post

$750 plus freight?  Trade for a bare 9100FT working, plus some bucks?

-- 
Art



From mail at nessandsteve.plus.com  Sun Dec 24 12:45:36 2006
From: mail at nessandsteve.plus.com (Poachers rope)
Date: Sun, 24 Dec 2006 17:45:36 -0000
Subject: [Techtoolslist] Part out Fluke 9100
References: <001f01c70b81$4921d830$37ea4142@Art>
Message-ID: <002a01c72783$51d4fb60$6401a8c0@backflipper>

Hello Art,
Thanks for keeping that VFD for me. I believe I sent you an email from my 
work account so would just like to say if you can let me know the postage I 
will get the cash over to you ASAP.
Regards
Steve

----- Original Message ----- 
From: "Art Mallet - Artfromny" <artfromny at nycap.rr.com>
To: <techtoolslist at flippers.com>
Sent: Sunday, November 19, 2006 2:20 AM
Subject: [Techtoolslist] Part out Fluke 9100


> Working machine, I have too many of them
>
> Floppy drive - $30 shipped in US
> VFD (display) $90 shipped in US
> Keyboard $45 shipped in US
>
> Inquire for prices on other parts, will combine shipping on more than one
> item
>
>
> Art
>
>
>
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist at flippers.com
> http://seven.pairlist.net/mailman/listinfo/techtoolslist
> --
> This email has been verified as Virus free
> Virus Protection and more available at http://www.plus.net
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.394 / Virus Database: 268.14.7/537 - Release Date: 17/11/2006
>
> 


From markhooks at earthlink.net  Sun Dec 24 02:00:29 2006
From: markhooks at earthlink.net (Mark Hooks)
Date: Sun, 24 Dec 2006 02:00:29 -0500
Subject: [Techtoolslist] Fluke 9100 Woes, Memory Dip Settings Needed
Message-ID: <002e01c72729$345de6a0$6500a8c0@D9H12R41>

I just picked up a couple of 9100s with problems. One hangs up in memory 
test. I'm thinking it may not have the dip switch settings set up right. 
I've searched and searched but can't find the settings in the documentation. 
I'd appreciate it if someone could send them to me or point me to a manual 
that has them.

The second one doesn't even get that far. It hangs up with no display and 
the Run UUT and Disk Access LEDs lit. Any ideas on how to get these running 
would be appreciated.

Mark Hooks 


From mail at nessandsteve.plus.com  Sun Dec 24 14:24:52 2006
From: mail at nessandsteve.plus.com (Poachers rope)
Date: Sun, 24 Dec 2006 19:24:52 -0000
Subject: [Techtoolslist] FS 2 Fluke 9100As one monitor 2 external
	keyboards
References: <64B28C6273410C4D8D7A0F06150CD4884217@mainserver.muppzlab.local><01f601c711db$5b1ac6e0$c600a8c0@c62850a>
	<001701c726cd$690317b0$37ea4142@Art>
Message-ID: <004801c72791$2fd68e80$6401a8c0@backflipper>

Hello Art,
Any chance you will sell one of those keyboards to me while I am getting the 
VFD.
Regards
Steve

----- Original Message ----- 
From: "Art Mallet - Artfromny" <artfromny at nycap.rr.com>
To: "Technical Tools Mail List" <techtoolslist at flippers.com>
Sent: Saturday, December 23, 2006 8:03 PM
Subject: [Techtoolslist] FS 2 Fluke 9100As one monitor 2 external keyboards


> MessageJust got this lot in and dont need it
>
> 2 Fluke 9100As, 2 external keyboards, one external monitor, looks to be 12
> or 13 inch and is branded Fluke
>
> Lot was purchased as is, working, from a vendor who also has a lot of
> scopes, etc and the defective scopes were listed as such - nevertheless,
> sold absolutely as is.
>
> Ships in 3 boxes at 31# per, UPS ground.  No charge for packing and
> handling, I never really unpacked the boxes.  Overseas shipping available
> but its going to be expensive - I use Global Priority only, don't trust 
> air
> or surface parcel post
>
> $750 plus freight?  Trade for a bare 9100FT working, plus some bucks?
>
> -- 
> Art
>
>
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist at flippers.com
> http://seven.pairlist.net/mailman/listinfo/techtoolslist
>
> ===========================================================
> This email has been verified as Virus free
> Virus Protection and more available at http://www.plus.net
> ===========================================================
>
> ===========================================================
> This email has been verified as Virus free
> Virus Protection and more available at http://www.plus.net
> ===========================================================
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.432 / Virus Database: 268.15.26/598 - Release Date: 
> 22/12/2006 15:22
> 


From dfish_1 at comcast.net  Sun Dec 24 14:28:28 2006
From: dfish_1 at comcast.net (David Fish)
Date: Sun, 24 Dec 2006 14:28:28 -0500
Subject: [Techtoolslist] Fluke 9100 Woes, Memory Dip Settings Needed
References: <002e01c72729$345de6a0$6500a8c0@D9H12R41>
Message-ID: <029101c72791$b0b1c510$6401a8c0@DFISH03brooks>

Mark,

 Try the Service Manual Part 2, page 3-25, Table 3-6. It has the config 
switch settings for various RAM sizes.

Have a Merry Christmas All.

Dave
----- Original Message ----- 
From: "Mark Hooks" <markhooks at earthlink.net>
To: "Techtoolslist" <Techtoolslist at flippers.com>
Sent: Sunday, December 24, 2006 2:00 AM
Subject: [Techtoolslist] Fluke 9100 Woes, Memory Dip Settings Needed


>I just picked up a couple of 9100s with problems. One hangs up in memory
> test. I'm thinking it may not have the dip switch settings set up right.
> I've searched and searched but can't find the settings in the 
> documentation.
> I'd appreciate it if someone could send them to me or point me to a manual
> that has them.
>
> The second one doesn't even get that far. It hangs up with no display and
> the Run UUT and Disk Access LEDs lit. Any ideas on how to get these 
> running
> would be appreciated.
>
> Mark Hooks
>
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist at flippers.com
> http://seven.pairlist.net/mailman/listinfo/techtoolslist 


From jrr at flippers.com  Sun Dec 24 14:56:44 2006
From: jrr at flippers.com (John Robertson)
Date: Sun, 24 Dec 2006 11:56:44 -0800
Subject: [Techtoolslist] Fluke 9100 Woes, Memory Dip Settings Needed
In-Reply-To: <002e01c72729$345de6a0$6500a8c0@D9H12R41>
References: <002e01c72729$345de6a0$6500a8c0@D9H12R41>
Message-ID: <p06230902c1b48b6426a0@[192.168.2.17]>

At 2:00 AM -0500 12/24/06, Mark Hooks wrote:
>I just picked up a couple of 9100s with problems. One hangs up in memory
>test. I'm thinking it may not have the dip switch settings set up right.
>I've searched and searched but can't find the settings in the documentation.
>I'd appreciate it if someone could send them to me or point me to a manual
>that has them.
>
>The second one doesn't even get that far. It hangs up with no display and
>the Run UUT and Disk Access LEDs lit. Any ideas on how to get these running
>would be appreciated.
>
>Mark Hooks

If you have the CPU extension service board you can test the 9100s 
with a working unit and a 68000 pod. I believe Art (fromny) has these 
9100 series extension cards in stock - they normally came with the 
unit when it was bought, but they tended to separate over time...

John :-#)#


From jmartins at mppsolutions.com  Tue Dec 26 15:17:01 2006
From: jmartins at mppsolutions.com (Jose Luiz Martins)
Date: Tue, 26 Dec 2006 18:17:01 -0200
Subject: [Techtoolslist] Data IO 29A
Message-ID: <20061226201701.27989.qmail@hm326.locaweb.com.br>

Hi Folks,

Some time ago, someone put many inforation about Data IO 29A, such as cable configuration and specific software. Once I've lost all my emails, could someone re-send it to me please ?

Thank you very much !


Jos? Luiz Martins

From jack.rubin at ameritech.net  Tue Dec 26 17:21:11 2006
From: jack.rubin at ameritech.net (Jack Rubin)
Date: Tue, 26 Dec 2006 16:21:11 -0600
Subject: [Techtoolslist] Data IO 29A
In-Reply-To: <20061226201701.27989.qmail@hm326.locaweb.com.br>
Message-ID: <000001c7293c$264bb1e0$176fa8c0@obie>

take a look here - http://www.leopardcats.com/dio/dataio29b.htm 

Jack

> -----Original Message-----
> From: techtoolslist-bounces at flippers.com 
> [mailto:techtoolslist-bounces at flippers.com] On Behalf Of Jose 
> Luiz Martins
> Sent: Tuesday, December 26, 2006 2:17 PM
> To: techtoolslist at flippers.com
> Subject: [Techtoolslist] Data IO 29A
> 
> 
> Hi Folks,
> 
> Some time ago, someone put many inforation about Data IO 29A, 
> such as cable configuration and specific software. Once I've 
> lost all my emails, could someone re-send it to me please ?
> 
> Thank you very much !
> 
> 
> Jos? Luiz Martins _______________________________________________
> Techtoolslist mailing list
> Techtoolslist at flippers.com 
> http://seven.pairlist.net/mailman/listinfo/tec> htoolslist
> 
> -- 
> 
> No virus found in this incoming message.
> 
> Checked by AVG Free Edition.
> Version: 7.5.432 / Virus Database: 268.15.27/602 - Release 
> Date: 12/25/2006 10:19 AM
>  
> 

-- 
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.432 / Virus Database: 268.15.27/602 - Release Date:
12/25/2006 10:19 AM
 


From rlboots at cedar-rapids.net  Tue Dec 26 17:24:56 2006
From: rlboots at cedar-rapids.net (Rodger Boots)
Date: Tue, 26 Dec 2006 16:24:56 -0600
Subject: [Techtoolslist] Data IO 29A
In-Reply-To: <20061226201701.27989.qmail@hm326.locaweb.com.br>
References: <20061226201701.27989.qmail@hm326.locaweb.com.br>
Message-ID: <4591A138.6020107@cedar-rapids.net>

Jose Luiz Martins wrote:
> Hi Folks,
>
> Some time ago, someone put many inforation about Data IO 29A, such as cable configuration and specific software. Once I've lost all my emails, could someone re-send it to me please ?
>
> Thank you very much !
>
>
> Jos? Luiz Martins
> _______________________________________________
>
>   
You mean THIS?

 From Mark Hooks:

After a year of messing around with this thing off and on I finally got it
working. I had to revert to Promlink version 2.4 and Windows 98 to get it
running. Seems the later versions don't have the Unipak option. They only
have Unipak 2B which is different. I also made a custom cable for it.

So others wont have to go through the pain I did, here's the pin 
connections
for making a cable:

DB9 (PC)   DB25 (29A)
   2           2
   3           3
   8           4
   7           5
   5           7

I was able to use the default port settings to get things to communicate.


From jack.rubin at ameritech.net  Tue Dec 26 21:25:29 2006
From: jack.rubin at ameritech.net (Jack Rubin)
Date: Tue, 26 Dec 2006 20:25:29 -0600
Subject: [Techtoolslist] Data IO 29A
In-Reply-To: <4591A138.6020107@cedar-rapids.net>
Message-ID: <000001c7295e$46d3f8b0$176fa8c0@obie>

I guess it's the typical YMMV situation - I've used Promlink 6.1 with a
standard serial cable under Win2K with a Model 19, a 22 and a 29B, using
a Unipak2 (not 2B) on the modular units. Sorry if this setup doesn?t
work with the original Unipak.

Jack

> -----Original Message-----
> From: techtoolslist-bounces at flippers.com 
> [mailto:techtoolslist-bounces at flippers.com] On Behalf Of Rodger Boots
> Sent: Tuesday, December 26, 2006 4:25 PM
> To: Technical Tools Mail List
> Subject: Re: [Techtoolslist] Data IO 29A
> 
> 
> Jose Luiz Martins wrote:
> > Hi Folks,
> >
> > Some time ago, someone put many inforation about Data IO 
> 29A, such as 
> > cable configuration and specific software. Once I've lost all my 
> > emails, could someone re-send it to me please ?
> >
> > Thank you very much !
> >
> >
> > Jos? Luiz Martins _______________________________________________
> >
> >   
> You mean THIS?
> 
>  From Mark Hooks:
> 
> After a year of messing around with this thing off and on I 
> finally got it working. I had to revert to Promlink version 
> 2.4 and Windows 98 to get it running. Seems the later 
> versions don't have the Unipak option. They only have Unipak 
> 2B which is different. I also made a custom cable for it.
> 
> So others wont have to go through the pain I did, here's the pin 
> connections
> for making a cable:
> 
> DB9 (PC)   DB25 (29A)
>    2           2
>    3           3
>    8           4
>    7           5
>    5           7
> 
> I was able to use the default port settings to get things to 
> communicate.
> 
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist at flippers.com 
> http://seven.pairlist.net/mailman/listinfo/tec> htoolslist
> 
> -- 
> 
> No virus found in this incoming message.
> 
> Checked by AVG Free Edition.
> Version: 7.5.432 / Virus Database: 268.15.27/602 - Release 
> Date: 12/25/2006 10:19 AM
>  
> 

-- 
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.432 / Virus Database: 268.15.27/602 - Release Date:
12/25/2006 10:19 AM
 


From jrr at flippers.com  Wed Dec 27 02:09:46 2006
From: jrr at flippers.com (John Robertson)
Date: Tue, 26 Dec 2006 23:09:46 -0800
Subject: [Techtoolslist] Data IO 29A
In-Reply-To: <20061226201701.27989.qmail@hm326.locaweb.com.br>
References: <20061226201701.27989.qmail@hm326.locaweb.com.br>
Message-ID: <p06230905c1b7cbe818f2@[192.168.2.17]>

Hi Jos? and everyone else,

This link will take you to the archives for Tech Tools List...
http://seven.pairlist.net/pipermail/techtoolslist/

And for a searchable archive go to:
http://www.vectorlist.org/

John :-#)#

At 6:17 PM -0200 12/26/06, Jose Luiz Martins wrote:
>Hi Folks,
>
>Some time ago, someone put many inforation about 
>Data IO 29A, such as cable configuration and 
>specific software. Once I've lost all my emails, 
>could someone re-send it to me please ?
>
>Thank you very much !
>
>Jos? Luiz Martins