[Techtoolslist] Cross to read a PROM?

Bill Karkula wkarkula at comcast.net
Sun Feb 19 11:21:43 EST 2006


You could be right about the security fuse on the 'S153 - I was going from
memory. These parts go back over 20 years ago. I used to work for MMI who
created the PAL which was a competitive device to the FPLA. We had the
security link on the PALs for sure.

Bill

-----Original Message-----
From: Phil Morris [mailto:arcaderelics at irongiant.org.uk]
Sent: Sunday, February 19, 2006 8:22 AM
To: wkarkula at comcast.net; Technical Tools Mail List
Subject: RE: [Techtoolslist] Cross to read a PROM?




>It's not a prom but an FPLA from Signetics. If the securtity link that

>protects the reading of the fuse array is blown (which is usually the case

>in commercial products, you will be unable to read or duplicate it as the

>addressing of the fuse array will be scrambled for protection.


Interesting ............... my own research (a few days ago) revealed that
it's a PLD and doesn't have a security fuse so *can* be read. :)


Phil




>-----Original Message-----

>From: techtoolslist-bounces at flippers.com

>[mailto:techtoolslist-bounces at flippers.com]On Behalf Of joemagiera

>Sent: Sunday, February 19, 2006 7:35 AM

>To: Technical Tools Mail List

>Subject: RE: [Techtoolslist] Cross to read a PROM?

>

>

>Thanks for the couple of suggestions. I should have been more clear on my

>original question. I'm just trying to read the PROM (it is a PROM isn't

>it?) to verify against the MAME set that it's not corrupted. I'm using an

>EETools Top Max which is a pretty good device (although it can't do the

>2708's). In the past, Al Kossow's original PROM cross reference (now

hosted

>on a few sites, but I usually pull it from mikesarcade.com) has always been

>able to stear me to a substitue PROM to be able to read it, but this one

>isn't listed.

>

>Joe

>

>-----Original Message-----

>From: techtoolslist-bounces at flippers.com

>[mailto:techtoolslist-bounces at flippers.com]On Behalf Of joemagiera

>Sent: Saturday, February 18, 2006 10:34 PM

>To: techtoolslist at flippers.com

>Subject: [Techtoolslist] Cross to read a PROM?

>

>I checked the usual PROM cross reference sites with no luck. Can anyone

>suggest a suitable cross refernces to read a Signetics N82S153N PROM?

>Thanks,

>

>Joe

>

>_______________________________________________

>Techtoolslist mailing list

>Techtoolslist at flippers.com

>http://seven.pairlist.net/mailman/listinfo/techtoolslist

>

>_______________________________________________

>Techtoolslist mailing list

>Techtoolslist at flippers.com

>http://seven.pairlist.net/mailman/listinfo/techtoolslist


Signature: Repairer of and collector of classic old arcade games - if you
know of anyone with old arcade games (such as Space Invaders, Galaxian,
Tempest, Asteroids, etc) please let me know.





More information about the Techtoolslist mailing list