[Techtoolslist] Fluke 9010

[Martin White]

Nah, don¹t worry about stripping it down, I¹m gonna take mine apart and do
the tests on it see if I can see what¹s up with it. If it¹s a fluke
programmed one then I won¹t have anything ­ sorry! Was just thinking that I
have a few boxes of unknown stuff and some are 40 pin :o)


On 19/11/06 14:48, "Chris Toseland" <Chris at muppzlab.co.uk> wrote:


> Hi Martin,

>  

> From memory it was a mask programmed 804x series, I'd need to strip it down

> again to be 100% sure.

>  

> Cheers

>  

> Chris

>>  

>>  

>> -----Original Message-----

>> From:  techtoolslist-bounces at flippers.com

>> [mailto:techtoolslist-bounces at flippers.com]  On Behalf Of Martin White

>> Sent: 19 November 2006  14:16

>> To: Technical Tools Mail List  <techtoolslist at flippers.com>

>> Subject: Re: [Techtoolslist]  Fluke 9010

>> 

>> Chris,

>> 

>> What¹s the cpu? The service manual shows  ³536094² but not too sure if this

>> is a Fluke part number or what? Is that the  actual number on the cpu?

>> 

>> Just read through some interesting stuff on  the tape drives in the service

>> manual so I may open mine up at some point and  see if I can work out what¹s

>> up with the drive. Used to work fine until it was  stored for a few months.

>> When it came out of storage it no longer works. Never  really bothered about

>> it too much since I have the RS232 option but it would  be nice to get it

>> going again!

>> 

>> Martin.

>> 

>> 

>> On 19/11/06 12:47,  "Chris Toseland" <Chris at muppzlab.co.uk> wrote:

>> 

>>  

>>> Hi  folks,

>>> 

>>> This maybe a long shot but does anyone have or can duplicate the  controller

>>> CPU for the tape drive unit on a 9010?

>>> My tape unit doesn't  work, I've checked the sensors and even tried driving

>>> the CPU input pins  directly all to no avail so I and can only assume that

>>> the CPU is  dead.

>>> 

>>> Thanks

>>> 

>>> Chris

>>> 

>>>  

>>> 

>>>  _______________________________________________

>>> Techtoolslist  mailing list

>>> Techtoolslist at flippers.com

>>> http://seven.pairlist.net/mailman/listinfo/techtoolslist

>> 

>> 

>> --  

>> Guddler's Domain

>> http://www.guddler.co.uk

>> 

> 

> 

> _______________________________________________

> Techtoolslist mailing list

> Techtoolslist at flippers.com

> http://seven.pairlist.net/mailman/listinfo/techtoolslist



-- 
Guddler's Domain
http://www.guddler.co.uk


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://seven.pairlist.net/pipermail/techtoolslist/attachments/20061119/512c9aba/attachment.htm>