[Techtoolslist] Fluke 9100 Woes, Memory Dip Settings Needed

[John Robertson]

At 2:00 AM -0500 12/24/06, Mark Hooks wrote:

>I just picked up a couple of 9100s with problems. One hangs up in memory

>test. I'm thinking it may not have the dip switch settings set up right.

>I've searched and searched but can't find the settings in the documentation.

>I'd appreciate it if someone could send them to me or point me to a manual

>that has them.

>

>The second one doesn't even get that far. It hangs up with no display and

>the Run UUT and Disk Access LEDs lit. Any ideas on how to get these running

>would be appreciated.

>

>Mark Hooks


If you have the CPU extension service board you can test the 9100s 
with a working unit and a 68000 pod. I believe Art (fromny) has these 
9100 series extension cards in stock - they normally came with the 
unit when it was bought, but they tended to separate over time...

John :-#)#