[Techtoolslist] Data I/O 29B on XP?

[martin at guddler.co.uk]

I had no idea that mark's website had now gone, but thanks to  
archives, here's the info you need:
http://web.archive.org/web/20051230044833/www.leopardcats.com/dio/dataioserial.htm

I can confirm that his info is correct since he made the cable that I  
have here.

Martin.

On 27 Nov 2007, at 14:37, Joe Magiera wrote:


> The cable isn't a standard serial cable?  Did you have to mod the  

> cable or

> is it some other standard cable that I can just get at my local PC  

> store?

>

> Joe

>

> -----Original Message-----

> From: techtoolslist-bounces at flippers.com

> [mailto:techtoolslist-bounces at flippers.com] On Behalf Of Bill Karkula

> Sent: Monday, November 26, 2007 10:51 PM

> To: 'Technical Tools Mail List'

> Subject: Re: [Techtoolslist] Data I/O 29B on XP?

>

> I can confirm the version below works on my Dell PIII-700 and XP.   

> Is your

> cable OK? You do need a specifically wired cable as shown in the  

> Data I/O

> manual and to set the baud rate (going from my memory here) to 9600  

> N 8 1.

> Also, is the serial port enabled in your BIOS?

>

> Best Regards,

>

> Bill

> -----Original Message-----

> From: techtoolslist-bounces at flippers.com

> [mailto:techtoolslist-bounces at flippers.com] On Behalf Of Arcadeforever

> Sent: Monday, November 26, 2007 9:08 PM

> To: Technical Tools Mail List

> Subject: Re: [Techtoolslist] Data I/O 29B on XP?

>

> Works fine for me too, download the version from mikes arcade.com

>

> On Nov 26, 2007 3:44 PM, Joseph Magiera <joemagiera at ameritech.net>  

> wrote:

>

>> Can anyone confirm that they can interface with a Data I/O 29B  

>> using a PC

>> running Windows XP?

>>

>> I finally am going to try to get my Data I/O going, and I plan on  

>> using a

>> Pentium III, 500mg PC, loaded with Windows XP.  A pretty unpowerful

> computer

>> by today's standard, but should be plenty for running the Data I/O

> software

>> (if it can indeed work on XP).

>>

>> Any tips or tricks to note on installing/running?  Thanks,

>>

>> Joe

>> joemagiera at ameritech.net

>>

>> _______________________________________________

>> Techtoolslist mailing list

>> Techtoolslist at flippers.com

>> http://seven.pairlist.net/mailman/listinfo/techtoolslist

>>

>

>

>

> -- 

> Wayne Moore

> _______________________________________________

> Techtoolslist mailing list

> Techtoolslist at flippers.com

> http://seven.pairlist.net/mailman/listinfo/techtoolslist

>

> _______________________________________________

> Techtoolslist mailing list

> Techtoolslist at flippers.com

> http://seven.pairlist.net/mailman/listinfo/techtoolslist

>

> _______________________________________________

> Techtoolslist mailing list

> Techtoolslist at flippers.com

> http://seven.pairlist.net/mailman/listinfo/techtoolslist