[Techtoolslist] Fluke 9010a Troubleshooting w/ Omega Race (now Xeltek SuperPro question)

[Matt Rossiter]

This question is for anyone of course.  :)

Thanks!

Matt

On Sat, 13 Sep 2008 01:20:27 -0700, Matt Rossiter <matt at rossiters.com>
wrote:

> Hey John,

> 

> I recently swooped up a Xeltek SuperPro Model 280U on Ebay for a pretty

> cheap price.  It works great and I can test a number of rams with it

> including 6116 Static Rams, but I don't see any support for 2114 rams. 

How

> were you able to make your Xeltek SuperPro be able to test them?

> 

> Just Curious,

> 

> Matt

> 

> 

> On Mon, 22 Jan 2007 11:01:59 -0800, John Robertson <jrr at flippers.com>

> wrote:

> ...

>> 

>> I had a lot (8) of the 2114's that were bad and ended up making my 

>> Xeltek Super Pro be able to test those suckers as I do not have a 

>> stand-alone RAM tester that would handle the 2114.

>> 

>> Problems with reading the Vector ROM/RAM have yet to be solved, even 

>> had trouble reading the game ROM for a while - flaky 74LS138.

>> 

>> I hate getting working on these corroded boards. Not worth my time, 

>> yet too much of a challenge to discard...I love puzzles too much!

>> 

>> John :-#)#

>> 

>> At 12:36 AM -0800 1/22/07, Matt Rossiter wrote:

>>>This might be more of a Vectorlist question, but I thought I might try

>>>here.

>>>

>>>Right now I'm using a 100% working Omega Race boardset to make sure I

> have

>>>the correct setup using the Fluke 9010a and Z80 Pod.

>>>

>>>First of all, the boardset just won't run with the Z80 Pod.  I can see

>>>that the Reset line is pulsing.  It won't run if I disable the watchdog

>>>circuit either.  *sometimes* I can get it to do a Quick Ram Test

>>>successfully.  Other times I get data error messages and if I do a bus

>>>test it will report a bunch of data lines tied together.  Of course, if

I

>>>put a normal z80 processor back in the game works perfectly fine.

>>>

>>>So, I'm just wondering if anyone out there knows how to properly setup

an

>>>Omega Race boardset for troubleshooting with the Fluke 9010a and Z80

pod.

>>>This Pod should be working fine since I used it recently on a Pac-Man.

>>>

>>>thanks

>>>

>>>Matt

>> 

>> _______________________________________________

>> Techtoolslist mailing list

>> Techtoolslist at flippers.com

>> http://seven.pairlist.net/mailman/listinfo/techtoolslist

>> 

> _______________________________________________

> Techtoolslist mailing list

> Techtoolslist at flippers.com

> http://seven.pairlist.net/mailman/listinfo/techtoolslist

> FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment

>