[Techtoolslist] Fluke 9010a issue with pod self test

[Colin Davies]

Having a look at the service manual I'm thinking it might need a new 6820 
Pia chip... would I be along the right lines ?

Cheers, Colin

----- Original Message ----- 
From: "Colin Davies" <colin.w.davies at btopenworld.com>
To: <techtoolslist at flippers.com>
Sent: Wednesday, September 24, 2008 1:18 AM
Subject: [Techtoolslist] Fluke 9010a issue with pod self test



>I just tried my new fluke 9010a with RS-232... passes self test... but when 

>I plug a known working 6502 pod in and do a bus test it reports 6502 pod 

>error 00 (iirc)....

>

> Is this a relatively easy fix or should I bite the bullet and move the 

> rs-232 module over to my working unit ?  ( Is that all I have to do ? or 

> are there other modifications required to the base unit to accept it ?)

>

> I'd rather fix the faulty unit to be honest, as the worker is in really 

> really great condition so I'd like to keep it as a spare and use the other 

> new arrival for now.....

>

> Thanks for your help,

> Regards, Colin

> _______________________________________________

> Techtoolslist mailing list

> Techtoolslist at flippers.com

> http://seven.pairlist.net/mailman/listinfo/techtoolslist

> FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment