[Techtoolslist] 9010a RS232 problem?

[Kevin Moore]

It's doing a power on reset, after pressing "Aux i/f", then "Read", then
"Enter". It will state Receiving, then reset after about 2 secs. It then
comes back on stating Fluke 9000 restarted, self test ok.

Kevin



On Tue, Jan 5, 2010 at 8:28 AM, Tim Matthews <trmatthe at gmail.com> wrote:


> >

> > > -----Original Message-----

> > > From: techtoolslist-bounces at flippers.com

> > > Subject: Re: [Techtoolslist] 9010a RS232 problem?

> > >

> > > It's not a pod problem, I can use the fluke normally w/o problem. I'm

> > > trying

> > > to hook up the rs232 to a computer to upload scripts. It only resets

> > after

> > > hitting enter/yes after doing an Aux/if, read. while trying to send a

> > > script

> >

>

> Hi Kevin,

>

> Can you describe exactly what is being shown on the Fluke display when it

> fails?

> I'm not sure if you are describing the Fluke doing a Power-On Reset, or

> whether it's

> just dropping out of RX mode.

>

> cheers

> tim

> _______________________________________________

> Techtoolslist mailing list

> Techtoolslist at flippers.com

> http://seven.pairlist.net/mailman/listinfo/techtoolslist

> FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment

> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

>