[Techtoolslist] Fluke 9010a 68000 Pod Eprom TestingonOutrun-help please !!

[Colin Davies]

Ahhh.... Is this partly what the big custom is for next to CPU 1 ? - I see 
its got a number of Chip Selects that mostly go to the bottom board..... 
Not sure what else it does though, maybe it does blits and things too ??

So far, the CPU 1 Eproms and Rams appear to be 'hard wired memory mapped' , 
so at least I can get at them initially....  ( I've not looked if the 2nd 
68000 shared memory is hard wired yet though )

Its also possible (well I did a quick test and it worked for me) to just run 
tests on the top board on its own.....   obviously you are Blind here..... 
I'm learning as I go....

If the stuff (maybe on the bottom board) is dynamic, then I'd hope that if 
you got the top board initially running the code, then it sets up the map 
for you....and you just prod away at it then.....       I do agree that they 
are indeed a PIG though....

Cheers, Colin


----- Original Message ----- 
From: "Andrew Welburn" <andy at andysarcade.net>
To: <jrr at flippers.com>; "Technical Tools Mail List" 
<techtoolslist at flippers.com>
Sent: Thursday, June 10, 2010 8:36 AM
Subject: Re: [Techtoolslist] Fluke 9010a 68000 Pod Eprom 
TestingonOutrun-help please !!



> Outrun is a pig, and i have not recently tried to work it all out, it has 

> a dynamic memory map.

>

> You ned to plug the memory mapper with a bunch of values to put the 

> ram/rom in the releavant memory locations. I messed around with this, but 

> i still couldn't get it to play ball and gave up...

>