[Techtoolslist] WTB 9010 fluorescent display

[Danny Pearson]

Hi John, yeah that was my first thought.   Unfortunately it's not them
(6118's), I swapped a couple around and the issue with the first 2 chars is
still there.   I even jumpered between a working char and a non working
char, nothing.  Jumpering from Char 1 to a free character works fine (I can
see the 'F') so it's definitely the Fluorescent display that has the issue.

Cheers,

Dan

-----Original Message-----
From: techtoolslist-bounces at flippers.com
[mailto:techtoolslist-bounces at flippers.com] On Behalf Of John Robertson
Sent: 14 June 2010 20:11
To: Technical Tools Mail List
Subject: Re: [Techtoolslist] WTB 9010 fluorescent display

Danny Pearson wrote:

> Hi guys, I've got a 9010 with a couple of bad characters (the first two)

in

> the fluorescent display.    Long shot I know but does anyone have a spare

> working display FS?  

>

>  

>

> Cheers,

>

>  

>

> DanP

>   

I should have a used spare display assembly that I can test and sell...

Is it the display or one of the driver ICs for the display that is at 
fault? There is a display test in the TTL files - buried within the 9010 
manual, that you can program in and run to have an idea of where the 
problem may lay.

John :-#)#

_______________________________________________
Techtoolslist mailing list
Techtoolslist at flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/