[Techtoolslist] Data I/O 29B

[Bill Karkula]

>From the keypad?  If so, try pressing "start" twice instead of once.  I seem

to recall (many years ago) that in some situations you had to press start
twice to commence an operation if using the keypad.  I always use promlink
so my memory about this is fuzzy.


Bill
-----Original Message-----
From: techtoolslist-bounces at flippers.com
[mailto:techtoolslist-bounces at flippers.com] On Behalf Of Kevin Moore
Sent: Friday, September 03, 2010 7:22 AM
To: Technical Tools Mail List
Subject: [Techtoolslist] Data I/O 29B

I've got a Data I/O with a Unipak.

The unit seems to function correctly, but I seem to have a problem loading
prom files for tempest. I'm able to load files for say 2516, or 2532. It's
bit slow, but it loads (in about 30 secs) and I'm able to burn them.

But when I try to load any prom file the program states that it's waiting
for programmer response (normal for even the 2516 etc. ) But it either never
get's a response, or the file is so small that it loaded to quickly and the
program missed the response? I've let it sit for 10 mins waiting and
nothing.

It would be nice to be able to load a file, instead of having to copy from a
master prom.

Not sure what's going on.

Any ideas that I could try would be apperciated.

Thanks,

Kevin
_______________________________________________
Techtoolslist mailing list
Techtoolslist at flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
No virus found in this incoming message.
Checked by AVG - www.avg.com 
Version: 9.0.851 / Virus Database: 271.1.1/3111 - Release Date: 09/03/10
01:34:00