[Techtoolslist] Data I/O 29B

[Kevin Moore]

Yes using PL with the modded code. Haven't  had a problem using it for
normal Roms, other than it is just a tad slow. It works fine. It wasn't
until I started trying to burn the proms that I had issues loading files. I
don't have any other 74s287 or 74s288 files other than the ones for
Battlezone, and Tempest. It could just be that file.

Could be how the file was created. I'm just using a downloaded V1 rom set
for Tempest that had the Prom files in it. Attached is the file in current
question. When I get home I will try the other ones, as they are a little
bigger.

Kevin


On Fri, Sep 3, 2010 at 4:59 PM, Bill Karkula <wkarkula at comcast.net> wrote:


> Using XP and the modified code promlink for windows?  I notice also on my

> "newer" 4 year old single core NB that it takes awhile for the file to come

> back with the checksum after the fill bar is already at 100%.  I program

> proms all of the time with promlink with no problems.  My only other

> thought

> is about the file size and how it was created.  I use absolute binary.  I'm

> unsure of the correct terminology and maybe one of the other folks who are

> on the list can help here.  If you use a windows hex editor the file size

> may be "rounded" to the next logical file size and not actual binary size

> causing the data I/O to choke on it?

>

> -----Original Message-----

> From: techtoolslist-bounces at flippers.com

> [mailto:techtoolslist-bounces at flippers.com] On Behalf Of Kevin Moore

> Sent: Friday, September 03, 2010 4:10 PM

> To: Technical Tools Mail List

> Subject: Re: [Techtoolslist] Data I/O 29B

>

> No, I'm using Promlink. You do have to hit start twice when putting it in

> remote mode, maybe that's what you recall?

>

> Kevin

>

>

> On Fri, Sep 3, 2010 at 4:02 PM, Bill Karkula <wkarkula at comcast.net> wrote:

>

> > >From the keypad?  If so, try pressing "start" twice instead of once.  I

> > seem

> > to recall (many years ago) that in some situations you had to press start

> > twice to commence an operation if using the keypad.  I always use

> promlink

> > so my memory about this is fuzzy.

> >

> >

> > Bill

> > -----Original Message-----

> > From: techtoolslist-bounces at flippers.com

> > [mailto:techtoolslist-bounces at flippers.com] On Behalf Of Kevin Moore

> > Sent: Friday, September 03, 2010 7:22 AM

> > To: Technical Tools Mail List

> > Subject: [Techtoolslist] Data I/O 29B

> >

> > I've got a Data I/O with a Unipak.

> >

> > The unit seems to function correctly, but I seem to have a problem

> loading

> > prom files for tempest. I'm able to load files for say 2516, or 2532.

> It's

> > bit slow, but it loads (in about 30 secs) and I'm able to burn them.

> >

> > But when I try to load any prom file the program states that it's waiting

> > for programmer response (normal for even the 2516 etc. ) But it either

> > never

> > get's a response, or the file is so small that it loaded to quickly and

> the

> > program missed the response? I've let it sit for 10 mins waiting and

> > nothing.

> >

> > It would be nice to be able to load a file, instead of having to copy

> from

> > a

> > master prom.

> >

> > Not sure what's going on.

> >

> > Any ideas that I could try would be apperciated.

> >

> > Thanks,

> >

> > Kevin

> > _______________________________________________

> > Techtoolslist mailing list

> > Techtoolslist at flippers.com

> > http://seven.pairlist.net/mailman/listinfo/techtoolslist

> > FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment

> > Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

> > No virus found in this incoming message.

> > Checked by AVG - www.avg.com

> > Version: 9.0.851 / Virus Database: 271.1.1/3111 - Release Date: 09/03/10

> > 01:34:00

> >

> > _______________________________________________

> > Techtoolslist mailing list

> > Techtoolslist at flippers.com

> > http://seven.pairlist.net/mailman/listinfo/techtoolslist

> > FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment

> > Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

> >

> _______________________________________________

> Techtoolslist mailing list

> Techtoolslist at flippers.com

> http://seven.pairlist.net/mailman/listinfo/techtoolslist

> FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment

> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

> No virus found in this incoming message.

> Checked by AVG - www.avg.com

> Version: 9.0.851 / Virus Database: 271.1.1/3111 - Release Date: 09/03/10

> 01:34:00

>

> _______________________________________________

> Techtoolslist mailing list

> Techtoolslist at flippers.com

> http://seven.pairlist.net/mailman/listinfo/techtoolslist

> FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment

> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

>