[Techtoolslist] FLUKE 9100A SERIES QUESTION

[martin at guddler.co.uk]

Al,

Do you have the ribbon cable in the test socket? If so, this is normal behavior.

Martin.

Sent from my iPhone

On 29 Nov 2010, at 02:34, "AL SACCO_hm" <asacco007 at hotmail.com> wrote:


> HELP FOR FLUKE 9100 USER

> 

> Need some help on an issue that has happened during power up on multiple Fluke 9100a or ft units that I tested....

> if no pod is attached to 9100 during it comes up "no pod connected".....

> if any pod is attached it comes up "enabled line caused timeout"

> any idea or help would be helpful.....

> 

> AL SACCO

> _______________________________________________

> Techtoolslist mailing list

> Techtoolslist at flippers.com

> http://seven.pairlist.net/mailman/listinfo/techtoolslist

> FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment

> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/