[Techtoolslist] Wallchart program for Data I/O programmers (found!)

[John Robertson]

John Robertson wrote:

> Anyone have a copy of the "wallchrt.exe" program from around 1997? 

> Earlier versions apprecaited too. The one claiming to be on the 

> data-io ftp server times out...

>

> ftp://ftp.dataio.com/device_lists/_archive/etc/README.html

>

> Any copies (PDF) of the Data I/O wallcharts (besides 1986) appreciated 

> as well.

>

> Thanks,

>

> John :-#)#

>

A copy arrived in today's email (thanks Rodger!). I'll add it to the 
site eventually, but as I am opening up a couple of mirrors shortly 
(flippers is taking up too much space!) I'll wait until then.

Does anyone have the old paper wall charts (schematics, manuals...) from 
Data IO that covered the programming pak - this is the pak with two rows 
of 28 pins (and two card inside - one Analog and the other Data) and 
were specific to the various manufacturers (Signetics, TI, Motorola, 
etc.). this plugs into the 19, 29 and 29B and helps with some very 
obscure (read ancient) PROM/ROMs used in early video game - I have a 
module for the 82S113 and am trying to make one to read the MCM6832 
Masked ROM. Wirewrapped up an adapter for reading as a TMS2716, but the 
29B complains that the CS line doesn't turn off the data lines (tied 
either high or low)...

John :-#)#

-- 
John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 
Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames)
                 www.flippers.com 
"Old pinballers never die, they just flip out"