[Techtoolslist] Can you use a 63C09E CPU in a Fluke 6809 9000A pod ?

[Colin Davies]

Anybody ? - I presume its worth a try, and I've not tried out my pod yet....

However, I've just snagged an Abi Boardmaster so I'm going to have a go with 
that first !!

Cheers, Col

----- Original Message ----- 
From: "Colin Davies" <colin.w.davies at btopenworld.com>
To: <techtoolslist at flippers.com>
Sent: Tuesday, August 23, 2011 6:39 PM
Subject: [Techtoolslist] Can you use a 63C09E CPU in a Fluke 6809 9000A pod 
?



> Hi Chaps

>

> I have a Konami board (Gryzor / Contra) to troubleshoot, getting a garbage 

> screen.

>

> I've removed the old 63C09E CPU and replaced with another from a donor 

> board and its nicely socketed.  There is some better activity on the 

> Address Bus now (some of the lines were floating on the CPU)

>

> Can I safely use this 63C09E  CPU in the 6809 Fluke 9000A Pod ?? .... It's 

> Supposed to be pin and instruction set compatiable.   If not I'll use a 

> 6809E and at least I'll be able to do some basic tests.

>

> Thanks,

> Colin

>

>

>

>

>

>

>

>

>

>

>

>

> _______________________________________________

> Techtoolslist mailing list

> Techtoolslist at flippers.com

> http://seven.pairlist.net/mailman/listinfo/techtoolslist

> FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment

> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/