[Techtoolslist] Kurz Kasch PDFs updated on Flippers

[John Robertson]

David Shoemaker wrote:

> Interesting, looks like it could be handy for some of the older stuff.  Need

> to come up with a Jamma card, hrmmm that won't work.  The interface board

> only goes up to 50 pins.

>

> Well I went and dug mine out tonight.  Looks like I have a set of basically

> useless cards for me:

>

> 300A-F, 301A, 302C  300ABCDEF  Credit Board Rockola

>

> PDF <http://www.flippers.com/pdfs/kk-300-rock-ola-credit.pdf> 

>

> No 

>

> 301A	Popularity Board  Rockola

>

> PDF <http://www.flippers.com/pdfs/kk-301-rock-ola-pop.pdf> No 

>

> 302C	Logic Mech. Bd.   Rockola

>

> PDF <http://www.flippers.com/pdfs/kk-302-rock-ola-logic.pdf> No

>

> A 185B 185ABC	Gun Fighter Midway

>

> PDF <http://www.flippers.com/pdfs/KK-185A_B_C-GunFighter.pdf>  Yes-185AB 

>

> And a 222C 222AC	280 Zzzap, Laguna Racer Midway

>

> PDF <http://www.flippers.com/pdfs/KK-222A_C_185B-280Zzzap.pdf> Yes-222AC

>

> So two partials and a whole set of Rockola stuff and I don't have a jukebox.

> Wonder if anyone around here does? J

>

> I also came across a KK Prom Test 1 unit with some socket cards.  Anyone

> have any information on that?

>

> David

>

>  

>   


The KK Prom Test 1 was a Eprom verifier requiring the use of a Signature 
Analyzer (KKs or HPs both are fine). I'm adding the sheet for that on 
the KK page on Flippers now, along with the PP-400 programmer and MOD 
pages for cards 174 and 215.

http://www.flippers.com/kurzkasc.html

More to come as folks send me stuff!

John :-#)#

>  

>

> -----Original Message-----

> From: techtoolslist-bounces at flippers.com

> [mailto:techtoolslist-bounces at flippers.com] On Behalf Of Jeff Anderson

> Sent: Tuesday, February 28, 2012 9:49 PM

> To: Technical Tools Mail List

> Subject: Re: [Techtoolslist] Kurz Kasch PDFs updated on Flippers

>

>  

>

> I have most of the KK cards including most/all the 400-series so I should be

> able to fill in a few holes in the PDF list as well..

>

>  

>

> I've replaced the caps on the unit I typically use, though I have another

> unit I found at a dist that had a switcher tastefully hacked on, I suppose

> that's another way to do it..

>

>  

>

> David: I use them fairly regularly and I have a couple pics of them up

> already:

>

>  

>

> Video pinball; video is on sony monitor at the far right (speaker hooks up

> to the flying leads):

>

>  <http://www.cybersled.com/albums/arcade-games/videopinball_bench.jpg>

> http://www.cybersled.com/albums/arcade-games/videopinball_bench.jpg

>

>  

>

> SI:

>

>  <http://www.cybersled.com/albums/arcade-games/midwaytest12.jpg>

> http://www.cybersled.com/albums/arcade-games/midwaytest12.jpg

>

>  

>

> Space Encounters w/sound (not running on a rev K main):

>

>  <http://www.cybersled.com/albums/arcade-games/midwaytest2.jpg>

> http://www.cybersled.com/albums/arcade-games/midwaytest2.jpg

>

>  

>

> 247C midway PS tester:

>

>  <http://www.cybersled.com/albums/arcade-games/midwaytest10.jpg>

> http://www.cybersled.com/albums/arcade-games/midwaytest10.jpg

>

>  

>

>  

>

> On Tue, Feb 28, 2012 at 9:22 PM, David Shoemaker < <mailto:davids at oz.net>

> davids at oz.net> wrote:

>

>   

>> Can you send me a picture of one of these?  I am curious how they set it

>>     

> up.

>

>   

>> I haven't actually seen any of these in action (though I do have a 

>>     

>

>   

>> unit and a couple cards).

>>