[Techtoolslist] Pod cable for 6809?

[John Robertson]

David Shoemaker wrote:

> Anyone have a spare good cable or know of a source?  Mine is flaky and I

> need to replace it.

>

>  

>

> Thanks,

>

> David

>

> ________

Usually the problem is right at the the 40 pin IC header and you can 
easily crimp on a new one if you don't have the twisted ribbon wire. You 
can even order them from Digi-Key with the 40 pin plug end terminating 
in the 40 pin IC socket.

The advantage with the twisted is you can run a cable of about a foot. 
With flat ribbon 8 inches is pretty safe.

I always plug a 40 pin IC socket (with flat solder tails) onto the UUT 
end to act as sacrifice pins.  Easier to replace that one!

John :-#)#

-- 
John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 
Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames)
                 www.flippers.com 
"Old pinballers never die, they just flip out"