[Techtoolslist] message

[CRC]

On 5 Oct 2012, at 9:16 AM, John Robertson wrote:

> CRC wrote:

>> On 4 Oct 2012, at 6:05 PM, adolfo bustos wrote:

>>  

>>> in a message to techtoolslist-request at flippers.com:

>>> techtoolslist at flippers.com

>>> Prom Burner  B&C Microsystems, Model 1409C

>>> Anyone know the Program "" Burner.exe ""

>>> compatible IBM .-

>>> for

>>> Universal E(e)prom Programmer

>>> B&C Microsystems

>>> 1409C Programmer

>>> Model 1409C ver 10.2CT

>>> Any info would be greatly appreciated.

>>> Thanks,

>>> Adolfo

>>> _______________________________________________

>>> Techtoolslist mailing list

>>> Techtoolslist at flippers.com

>>> http://seven.pairlist.net/mailman/listinfo/techtoolslist

>>> FTP site is: ftp://ttl.arcadetech.org

>>> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

>>>    

>> 

>> 

>> Adolfo -

>> 

>> I begged a copy of an older version of their "burner" program a while ago. It supports the 1400 and 1400/87. There is a slightly newer version, but it wouldn't work with my 1200.

>> 

>> I put the program at: <https://www.dropbox.com/sh/ztgxu9w53n08aba/j2nxmKCAWD>.

>> 

>> You might drop support at BP a note asking for a later version that supports your programmer.

>> 

>> Beware, I found that this program will not run on a current PC - I had to dig up a 500 MHz ancient box to run the programmer.

>> 

>> I hope this helps ->CRC

>> _______________________________________________

>>  

> If you can zip that up I'll add it to the archives...

> 

> John :-#)#

> 

> _______________________________________________

> Techtoolslist mailing list

> Techtoolslist at flippers.com

> http://seven.pairlist.net/mailman/listinfo/techtoolslist

> FTP site is: ftp://ttl.arcadetech.org

> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/



Alas, a brain fart - it was meant to be zipped. The Z-version can be found at <https://www.dropbox.com/s/4iljk5ecm066rje/BPWin.zip> ->CRC