[Techtoolslist] Fluke 9100A V6.1

[martin at guddler.co.uk]

Regarding the monitor all the info you should need is in the schematic which can be found in the service manual - which in turn is on the Flippers FTP.

 

The B/W signal is problematic since the B/W circuitry on the graphics card requires a 5V signal that it get’s from the monitor through the monitor cable. I guess you could supply one independently?

 

The colour signal is, as Andy says just standard arcade monitor compatible so just do what you would do for a normal arcade to SCART conversion if that’s the way you want to go. The signal is changed between B/W and Colour by a series of slightly strange DIP jumpers on the graphics card IIRC.


 

I’ve had the 9100 hooked up to a 1084S and that was fine. I did try a 10” MTC9000 since I had one on the bench but the dot pitch was just too small to comfortably see what was going on. In the end I settled for a brand new Hantarex Polo 14” monitor that I had. A bit of a waste really, especially when so many people were trying to prise the polo out of me for use in their games but I figured I wasn’t ever going to sell it so I may as well use it for the Fluke. Better than it sitting in the loft gathering dust!

 

Martin.

 


From: Andre Huijts
Sent: ‎07‎ ‎November‎ ‎2012 ‎23‎:‎20
To: Technical Tools Mail List
Subject: Re: [Techtoolslist] Fluke 9100A V6.1


Thanks guys, problem is those tools don't work with USB drives mostly....I dug out my old PC and this has a built in floppy drive unit so we should be good to go.......when I find back my old LCD screen.....#^%{##^

Could even hook it to my TV but I'd still need a VGA cable. Going iMac is nice but There are some drawbacks....

Has anyone some info about the Video connector ? I guess it's monochrome and I did find the pin out and Andrew told me it should work with a regular arcade monitor. Do we know what levels of video and sync is put out ? I am planning on hook it  to a small CRT TV with SCART input...this should work. Might just hook it to the Green input only to get that nice retro look :)

The voltages for SCART are low (upto 1V) compared to TTL levels usually used at arcade monitors.

Also, I need to get the 6502 and Z80 pods running, they seem to be inoperative now. The 6502 processor is getting pretty hot, not sure if that is any good. I loved the suggestion in the manual to use a second 6502 pod to examine the first but I only have one......

One more thing I got two more probes with the system, but those have a smaller connector , think it's RS-232 sized, Am I correct that these are for the 9010 ? If so, if anyone is interested in them let me know.....


Op 7 nov. 2012 om 21:17 heeft techtools-steve <techtools at arcadehacking.com> het volgende geschreven:


> Andre,

> 

> You can also try SAMdisk which claims to be able to run on windows 2000 and newer version of the OS.  I tied this utility back in April when my 9100 hard drive took a dirt nap and the software did work on XP.  Unfortunately, the v6.0 TD0 disk images were bad and I never successfully installed from disks created using SAMdisk.

> 

> http://simonowen.com/samdisk/

> 

> 

> 

> On 11/7/2012 11:33 AM, John Robertson wrote:

>> andre.huijts at upcmail.nl wrote:

>>> OK guys, I found my not-so old NEC USB floppy drive and hooked it up to my

>>> Win XP laptop. Of course windows doesn't recognize the floppy. Now how do I

>>> make images so I can send them to John (and others) ?

>>> 

>>> I saw a German DOS tool for it I believe in one of the FTP directories is

>>> that what I need to use. Or is there any Windows tool that does a "blind"

>>> track by track floppy image. Because I do have tools for the Atari ST that

>>> can do that...IIRC :)

>>> 

>>> I assume Clonezilla is only good for doing Harddisk images and not floppies

>>> ?

>>> 

>>> Andre

>> 

>> Hi Andre,

>> 

>> Actually on the FTP site I think we have a program that will create floppy images regardless if it can 'read' the floppy - ah, just found it, in the wrong directory - teledisk.lzh. Uploading it to the 9100A section on the FTP site.

>> 

>> Look for it here:

>> 

>> ftp://ttl.arcadetech.org/Test_Equipment/Fluke/9100A

>> 

>> I just renamed the directory "Test Equipment" to "Test_Equipment" to make it easier to type in that those darn %20s!

>> 

>> Dumper.zip is also of interest to some folks (9010A crowd) - was in 9100A directory (now moving to 9010A directory).

>> 

>> "This program will take the operator input for the begining & ending memory locations (in hex) then send ASCII formatted text out the 232 port to the host computer."

>> 

>> John :-#)#

> 

> _______________________________________________

> Techtoolslist mailing list

> Techtoolslist at flippers.com

> http://seven.pairlist.net/mailman/listinfo/techtoolslist

> FTP site is: ftp://ttl.arcadetech.org

> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

_______________________________________________
Techtoolslist mailing list
Techtoolslist at flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/