[Techtoolslist] FLUKE 9100A SCSI to CF Adapter - Success with Stratos CF AZTECMONSTER

[techtools-steve]

I received a couple emails inquiring about the SCSI to CF adapter I used 
so here are the details.  Everything you need is currently available at 
a reasonable price and the physical installation was rather painless.

The adapter I used is the Stratos CF AZTECMONSTER and you can buy one 
direct from Japan http://www.artmix.com/CF_AztecMonster.html but I found 
it easier and with significantly cheaper shipping to pick one up on 
ebay.  There were multiple listings for the board on ebay yesterday but 
it appears each had multiple bidders and closed above the starting price.

My FLUKE 9100A has the V6 roms installed and was configured using 
Service Disk 1.4.  I have successfully loaded the v4-1b software with 
the v6.1 update pending availability of new disks (hint-hint Andre)!

http://arcadehacking.com/public/fluke/FLUKE9100A_CF_AZTECHMONSTER_01.jpg
http://arcadehacking.com/public/fluke/FLUKE9100A_CF_AZTECHMONSTER_02.jpg 
<http://arcadehacking.com/public/fluke/FLUKE9100A_CF_AZTECHMONSTER_01.jpg>
http://arcadehacking.com/public/fluke/FLUKE9100A_CF_AZTECHMONSTER_03.jpg 
<http://arcadehacking.com/public/fluke/FLUKE9100A_CF_AZTECHMONSTER_01.jpg>
http://arcadehacking.com/public/fluke/FLUKE9100A_CF_AZTECHMONSTER_04.jpg 
<http://arcadehacking.com/public/fluke/FLUKE9100A_CF_AZTECHMONSTER_01.jpg>
http://arcadehacking.com/public/fluke/FLUKE9100A_CF_AZTECHMONSTER_05.jpg 
<http://arcadehacking.com/public/fluke/FLUKE9100A_CF_AZTECHMONSTER_01.jpg>


I hope this info helps someone else unbrick their Fluke 9100 after a 
fatal hard disk failure.