[Techtoolslist] 6502 pod error code

[Art]

I have had some luck re-soldering all the pins on the inter-board 
connectors - no experience with this particular pod/problem though

Art
----- Original Message ----- 
From: "Andre Huijts" <a.huijts at upcmail.nl>
To: "Technical Tools Mail List" <techtoolslist at flippers.com>
Sent: Sunday, November 18, 2012 4:13 PM
Subject: [Techtoolslist] 6502 pod error code


OK....

Something I noticed when checking once again my 6502 pod is that the 
interconnecting pins between the two boards seemed very loose on one side 
(the more near the lowest part of the pod).

I tried to connect them as tight as possible but the spacer near where the 
ground connection of the flat-cable is placed prevents it to fit really 
tight. I have a feeling there is still not a good/reliable connection 
between the boards this way.

When I connect it now and run the self-test I get this error:

Add line AB12 pin 22 not drivable

Neither the original pod manual nor the additional Pod info for the 9100 
indicate this error code and what it means. It is clear enough I guess but 
what do they mean with AB12 ?


André Huijts
andre.huijts at upcmail.nl





_______________________________________________
Techtoolslist mailing list
Techtoolslist at flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/