[Techtoolslist] Crystal Castles ROM Address Range

[Justin Johnson]

This is my first post.  I'm learning how to use my Fluke 9010 and ran  
into a problem doing a CRC check on some of the ROMS.  Looking in the  
MAME source code I found the address ranges for each ROM(see below).   
ROMs 304 to 305 work fine but the address appears to be out of range  
for ROMs 101 and 102.  ROM 101 according to the source code should  
start at 10000-11FFF. What address should I be using?  Where am I  
going wrong here??



ROM_START( ccastles )
   513      ROM_REGION( 0x14000, "maincpu", 0 )
   514      ROM_LOAD( "136022-403.1k", 0x0a000, 0x2000, CRC(81471ae5)  
SHA1(8ec13b48119ecf8fe85207403c0a0de5240cded4) )
   515      ROM_LOAD( "136022-404.1l", 0x0c000, 0x2000, CRC(820daf29)  
SHA1(a2cff00e9ddce201344692b75038431e4241fedd) )
   516      ROM_LOAD( "136022-405.1n", 0x0e000, 0x2000, CRC(4befc296)  
SHA1(2e789a32903808014e9d5f3021d7eff57c3e2212) )
   517      ROM_LOAD( "136022-102.1h", 0x10000, 0x2000, CRC(f6ccfbd4)  
SHA1(69c3da2cbefc5e03a77357e817e3015da5d8334a) )
   518      ROM_LOAD( "136022-101.1f", 0x12000, 0x2000, CRC(e2e17236)  
SHA1(81fa95b4d9beacb06d6b4afdf346d94117396557) )
   519
   520      ROM_REGION( 0x4000, "gfx1", 0 )
   521      ROM_LOAD( "136022-106.8d", 0x0000, 0x2000, CRC(9d1d89fc)  
SHA1(01c279edee322cc28f34506c312e4a9e3363b1be) )
   522      ROM_LOAD( "136022-107.8b", 0x2000, 0x2000, CRC(39960b7d)  
SHA1(82bdf764ac23e72598883283c5e957169387abd4) )
   523

Thanks

Justin