[Techtoolslist] 6800 to 6502 pod conversion...

[Andre Huijts]

So that should work on a converted 6800 pod as well because they are really identical.

Op 15 dec. 2012 om 03:14 heeft John Robertson <jrr at flippers.com> het volgende geschreven:


> Andre Huijts wrote:

>> Decided to convert my 6800 to a 6502 pod tonight. I was lucky as both pos are the "jumper type" so it was merely copying the jumper set-up from the 6502 and replacing the 6800 with the 6502 of the defective pod.

>> 

>> Hooked it up to the 9100A and it went through self-test without any problem :)

>> 

>> Just for fun, I replaced the 6502 with a CM630P (bought 5 from Bulgaria on e-bay) and sure enough it went through self-test fine again.

>> 

>> 

>> André Huijts

>> andre.huijts at upcmail.nl

> The regular 6502 pod supports a 6502B so put the fastest one you can find in it...

> 

> John :-#)#

> 

> _______________________________________________

> Techtoolslist mailing list

> Techtoolslist at flippers.com

> http://seven.pairlist.net/mailman/listinfo/techtoolslist

> FTP site is: ftp://ttl.arcadetech.org

> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/