[Techtoolslist] Kurz-Kasch TC-590-89 Test Clip

[John Robertson]

teeray wrote:

> Anyone know how a Kurz-Kasch TC-590-89 Test Clip is wired ?

> All I can find says it should have three test clips E4, B3, D3

>

> Thanks

> Tim

>

> _



These are part of the KK signature kit for 8080 boards. TC-590-89 is 
basically a 16 pin Glomper clip with jumpers:

Part "EE Module" is a 40 pin header box that have only one jumper 
between pins 14, 16 & 24.
Part "B-3" and "D-3" are a 16-pin glomper clips that each (identical) 
have jumpers between pins 3, 6, 8, 10, & 13.
Part "E-3" is a 16-pin glomper clips that have a jumper between pins 1 & 7.

These four parts are used with KKs docs on using the Sig Analyzer on the 
8080 boards and go on the corresponding IC (IC B-3, D-3, and E-3).

Hope this helps!

John :-#)#