[Techtoolslist] Fluke 9100 hard drives

[Andre Huijts]

Mine has a 300 MB SCSI drive installed.


Op 1 mrt. 2013, om 08:26 heeft Andrew Welburn <andy at andysarcade.net> het volgende geschreven:


> The 9100 will only see about 60mb. If you put in a larger drive it will see it as zero bytes, but this does not cause problems. I used a 100mb drive that showed as zero bytes for a few years.

> 

> Andrew Welburn (mobile)

> www.andys-arcade.com

> 

> On 1 Mar 2013, at 06:48, "David Shoemaker" <davids at oz.net> wrote:

> 

>> Well with all the trouble going around trying to get a SCSI -> IDE for CF to

>> work anyone know what the max size of SCSI drive will work in the 9100?

>> There are a few on ebay and I need to replace the drive in my 9100.

>> 

>> 

>> 

>> David

>> 

>> _______________________________________________

>> Techtoolslist mailing list

>> Techtoolslist at flippers.com

>> http://seven.pairlist.net/mailman/listinfo/techtoolslist

>> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment

>> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

> _______________________________________________

> Techtoolslist mailing list

> Techtoolslist at flippers.com

> http://seven.pairlist.net/mailman/listinfo/techtoolslist

> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment

> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/


André Huijts
andre.huijts at upcmail.nl