[Techtoolslist] Fluke 9010A Install with FIDE

[David Shoemaker]

Fide doesn't work on 64 bit because the underlying tools are 16 bit. 

-----Original Message-----
From: "Theron Troxel" <troxelone at yahoo.com>
Sent: ‎4/‎1/‎2013 8:27 PM
To: "Technical Tools Mail List" <techtoolslist at flippers.com>
Subject: Re: [Techtoolslist] Fluke 9010A Install with FIDE



Had a chance to look at this a little bit more tonight.  I am using Windows 7 x64, and doesn't appear to be working.  I can't even get the script to compile.

I switched to a little netbook that I have and now the script is compiling and not giving any errors, but won't transfer the data to the fluke.  The fluke just displays that it's receiving , but never changes.  My netbook is recognizing the cable and matched the settings on both the computer and fluke to match.

Any ideas would be greatly appreciated.


________________________________
 From: Theron Troxel <troxelone at yahoo.com>
To: Technical Tools Mail List <techtoolslist at flippers.com> 
Sent: Monday, April 1, 2013 6:12 PM
Subject: Re: [Techtoolslist] Fluke 9010A Install with FIDE
 
The cord was initially com7, but changed it thinking it had to be com1 - com4 to match the FIDE setting.  
_______________________________________________
Techtoolslist mailing list
Techtoolslist at flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
_______________________________________________
Techtoolslist mailing list
Techtoolslist at flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/