[Techtoolslist] Fluke 9010A Install with FIDE

[Rodger Boots]

Flow control is probably off or set wrong on computer end.  Open up control
panel, system, hardware, com ports.  Selects your com port and port
settings.  Flow control should be XON/XOFF for software flow control or
Hardware for hardware flow control.  Use whichever matches the programmer
setup.

If you're using Hardware and it doesn't work your null modem cable may be
wired wrong.

Good luck.


On Fri, Apr 12, 2013 at 5:36 PM, JJ <rugd2go at comcast.net> wrote:


> I tried to connect to my 9010a and laptop using xp and received a buffer

> overrun or overflow message on the 9010.  Any ideas on what the cause might

> be? I was using a null cable.

>

> Justin

>

> Sent from my Verizon Wireless 4G LTE DROID

>

> Matthew Rossiter <matt at rossiters.com> wrote:

>

> >Has anyone gotten Fluke FIDE to work in Windows 7?   I've always just

> >used my old Win XP laptop with a USB/Serial adapter and it works great.

> >

> >On 4/12/2013 11:13 AM, Theron Troxel wrote:

> >>

> >> I found out what I was doing wrong.  Didn't have a null modem cable

> adapter.  Ended up ordering a serial cable adapter, which I knew I didn't

> want.   Will try again with the correct part.

> >>

> >> ________________________________

> >>   From: Theron Troxel <troxelone at yahoo.com>

> >> To: Technical Tools Mail List <techtoolslist at flippers.com>

> >> Sent: Friday, April 12, 2013 1:07 PM

> >> Subject: Re: [Techtoolslist] Fluke 9010A Install with FIDE

> >>

> >>

> >>

> >>

> >>

> >> ________________________________

> >> From: Theron Troxel <troxelone at yahoo.com>

> >> To: "techtoolslist at flippers.com" <techtoolslist at flippers.com>

> >> Sent: Monday, April 1, 2013 5:50 PM

> >> Subject: [Techtoolslist] Fluke 9010A Install with FIDE

> >>

> >> Trying to get my fluke to respond to my computer. I have a USB-to-RS232

> cord, and my computer recognize the cord. I went to settings on my computer

> and set it to com1 and matched everything to the computer and fluke.

> >>

> >> Wrote a simple program that just displays "test" and tried sending it

> through the Fluke FIDE software. The fluke never responds to when I send

> the program. I don't get any errors of any type on the fluke. However, on

> the Fluke FIDE I get the following error:

> >>

> >>

> >> Starting process...

> >> WARNING: Include file already exists. File may have been included

> >> multiple times, or two files with the exact same file name may exist.

> >> It is recommended that you give your files distictive file names.

> >> C:\Program Files (x86)\Fluke FIDE\Scripts\test.9lc -> C:\Program Files

> (x86)\Fluke FIDE\Internal\test.9lc (exists).

> >> ERROR: Could not create batch file C:\Program Files (x86)\Fluke

> FIDE\Internal\9lc.bat.

> >> Permission denied

> >> Batch

> >> file processing failed.

> >> _______________________________________________

> >> Techtoolslist mailing list

> >> Techtoolslist at flippers.com

> >> http://seven.pairlist.net/mailman/listinfo/techtoolslist

> >> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment

> >> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

> >> _______________________________________________

> >> Techtoolslist mailing list

> >> Techtoolslist at flippers.com

> >> http://seven.pairlist.net/mailman/listinfo/techtoolslist

> >> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment

> >> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

> >> _______________________________________________

> >> Techtoolslist mailing list

> >> Techtoolslist at flippers.com

> >> http://seven.pairlist.net/mailman/listinfo/techtoolslist

> >> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment

> >> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

> >

> >_______________________________________________

> >Techtoolslist mailing list

> >Techtoolslist at flippers.com

> >http://seven.pairlist.net/mailman/listinfo/techtoolslist

> >FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment

> >Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

> _______________________________________________

> Techtoolslist mailing list

> Techtoolslist at flippers.com

> http://seven.pairlist.net/mailman/listinfo/techtoolslist

> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment

> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

>