[Techtoolslist] Fluke 9010A Install with FIDE

[Rodger Boots]

What connector size(s)?  I'm assuming 25 pin at programmer and 9 at
computer, but what do you ACTUALLY have?


On Fri, Apr 12, 2013 at 9:38 PM, JJ <rugd2go at comcast.net> wrote:


> I tried the prior and all my settings look good.  Anyone have the cable

> pin outs?  I would like to ohm out the cable.

>

> Thanks

>

> Justin

>

> Sent from my Verizon Wireless 4G LTE DROID

>

> Rodger Boots <rlboots2 at gmail.com> wrote:

>

> >Flow control is probably off or set wrong on computer end.  Open up

> control

> >panel, system, hardware, com ports.  Selects your com port and port

> >settings.  Flow control should be XON/XOFF for software flow control or

> >Hardware for hardware flow control.  Use whichever matches the programmer

> >setup.

> >

> >If you're using Hardware and it doesn't work your null modem cable may be

> >wired wrong.

> >

> >Good luck.

> >

> >

> >On Fri, Apr 12, 2013 at 5:36 PM, JJ <rugd2go at comcast.net> wrote:

> >

> >> I tried to connect to my 9010a and laptop using xp and received a buffer

> >> overrun or overflow message on the 9010.  Any ideas on what the cause

> might

> >> be? I was using a null cable.

> >>

> >> Justin

> >>

> >> Sent from my Verizon Wireless 4G LTE DROID

> >>

> >> Matthew Rossiter <matt at rossiters.com> wrote:

> >>

> >> >Has anyone gotten Fluke FIDE to work in Windows 7?   I've always just

> >> >used my old Win XP laptop with a USB/Serial adapter and it works great.

> >> >

> >> >On 4/12/2013 11:13 AM, Theron Troxel wrote:

> >> >>

> >> >> I found out what I was doing wrong.  Didn't have a null modem cable

> >> adapter.  Ended up ordering a serial cable adapter, which I knew I

> didn't

> >> want.   Will try again with the correct part.

> >> >>

> >> >> ________________________________

> >> >>   From: Theron Troxel <troxelone at yahoo.com>

> >> >> To: Technical Tools Mail List <techtoolslist at flippers.com>

> >> >> Sent: Friday, April 12, 2013 1:07 PM

> >> >> Subject: Re: [Techtoolslist] Fluke 9010A Install with FIDE

> >> >>

> >> >>

> >> >>

> >> >>

> >> >>

> >> >> ________________________________

> >> >> From: Theron Troxel <troxelone at yahoo.com>

> >> >> To: "techtoolslist at flippers.com" <techtoolslist at flippers.com>

> >> >> Sent: Monday, April 1, 2013 5:50 PM

> >> >> Subject: [Techtoolslist] Fluke 9010A Install with FIDE

> >> >>

> >> >> Trying to get my fluke to respond to my computer. I have a

> USB-to-RS232

> >> cord, and my computer recognize the cord. I went to settings on my

> computer

> >> and set it to com1 and matched everything to the computer and fluke.

> >> >>

> >> >> Wrote a simple program that just displays "test" and tried sending it

> >> through the Fluke FIDE software. The fluke never responds to when I send

> >> the program. I don't get any errors of any type on the fluke. However,

> on

> >> the Fluke FIDE I get the following error:

> >> >>

> >> >>

> >> >> Starting process...

> >> >> WARNING: Include file already exists. File may have been included

> >> >> multiple times, or two files with the exact same file name may exist.

> >> >> It is recommended that you give your files distictive file names.

> >> >> C:\Program Files (x86)\Fluke FIDE\Scripts\test.9lc -> C:\Program

> Files

> >> (x86)\Fluke FIDE\Internal\test.9lc (exists).

> >> >> ERROR: Could not create batch file C:\Program Files (x86)\Fluke

> >> FIDE\Internal\9lc.bat.

> >> >> Permission denied

> >> >> Batch

> >> >> file processing failed.

> >> >> _______________________________________________

> >> >> Techtoolslist mailing list

> >> >> Techtoolslist at flippers.com

> >> >> http://seven.pairlist.net/mailman/listinfo/techtoolslist

> >> >> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment

> >> >> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

> >> >> _______________________________________________

> >> >> Techtoolslist mailing list

> >> >> Techtoolslist at flippers.com

> >> >> http://seven.pairlist.net/mailman/listinfo/techtoolslist

> >> >> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment

> >> >> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

> >> >> _______________________________________________

> >> >> Techtoolslist mailing list

> >> >> Techtoolslist at flippers.com

> >> >> http://seven.pairlist.net/mailman/listinfo/techtoolslist

> >> >> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment

> >> >> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

> >> >

> >> >_______________________________________________

> >> >Techtoolslist mailing list

> >> >Techtoolslist at flippers.com

> >> >http://seven.pairlist.net/mailman/listinfo/techtoolslist

> >> >FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment

> >> >Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

> >> _______________________________________________

> >> Techtoolslist mailing list

> >> Techtoolslist at flippers.com

> >> http://seven.pairlist.net/mailman/listinfo/techtoolslist

> >> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment

> >> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

> >>

> >_______________________________________________

> >Techtoolslist mailing list

> >Techtoolslist at flippers.com

> >http://seven.pairlist.net/mailman/listinfo/techtoolslist

> >FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment

> >Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

> _______________________________________________

> Techtoolslist mailing list

> Techtoolslist at flippers.com

> http://seven.pairlist.net/mailman/listinfo/techtoolslist

> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment

> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

>