[Techtoolslist] BP DOS Software

[David Shoemaker]

Ok so I picked up a BP-1200 base unit (no chip adapter).  I went to the FTP
site to grab some software and see if I can get it working but can't find a
folder for the BP stuff.

This unit has a sticker "BPWin enabled" on the bottom.  Wondering if that
means it will work with a windows version of the software.

Any pointers to the software?

David

-----Original Message-----
From: techtoolslist-bounces at flippers.com
[mailto:techtoolslist-bounces at flippers.com] On Behalf Of Clay Cowgill
Sent: Friday, August 16, 2013 11:11 AM
To: 'Technical Tools Mail List'
Subject: [Techtoolslist] BP DOS Software

Just FYI, I BIN'd two sets of BP-1200/1400 modules on eBay because I saw
they had original software disks included (and I could use some of the
adapters...)  Assuming the media is good, it looks like it should be 3.17,
3.18, 3.19, 3.20, 3.21, and 3.22.  (Apparently they kept their upgrade media
while under service contract. ;-)

Anyway, that will fill out some earlier DOS software nicely (although I
don't have any reason to suspect they'd do anything different/better that
the 3.62 or 3.75 copies we already have can do).

Once they show up I'll get 'em read in and sent to John.

-Clay

_______________________________________________
Techtoolslist mailing list
Techtoolslist at flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/