[Techtoolslist] 9100FT

[Andrew Welburn]

ok so maybe the patched disk is in the SAMdisk format, not Teledisk like 
the rest...

i'm stuck until i can get a pc wit a floppy drive on the motherboard..

Andrew Welburn
http://www.andys-arcade.com

On 14/12/2013 16:15, Corey Stup wrote:

> On 12/14/2013 10:42 AM, Andrew Welburn wrote:

>> so i went back into the techtools FTP and found the v6 service disk

>> (SERVICE60.TD0), but i get the following error message when i try it

>> out on my 9100FT :

>> http://www.andysarcade.net/pix/DSC_1711.JPG

>>

>> "Fluke 9100A Service Init Disk, v6.0

>> This Board Has An Invalid Service ID"

>>

>>  Does this mean it doesn't like the fact its a 9100FT (not 9100A), or

>> does it mean the disk is serialised to a particular machine? (i

>> thought by v6 they had done away with serialisation)

>>

>> now, there's another disk image on the FTP - 60SERV.dsk - but its in

>> the SAMdisk format, and i dont have an internal floppy drive any more

>> to build and test this one...

>>

>> could it be that these are two different types of v6 service disk? Can

>> anyone remember which is which?

> The 6.0 disk was originally serialized.  I created a patch to remove the

> serial check at one point, and I thought I uploaded the patched disk.

> The 6.0 disk doesn't have the SCSI format tools so you still need the

> V1.4 disk as well.

>

>

> _______________________________________________

> Techtoolslist mailing list

> Techtoolslist at flippers.com

> http://seven.pairlist.net/mailman/listinfo/techtoolslist

> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment

> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

>