[Techtoolslist] 6800 to 6502 pod combo ROM?

[Theron Troxel]

I had a question on this, too.  I am trying to convert my 6800 to 6502 over the weekend and having problems getting it to work.  Can you use the original ROM, and if so, how?  I tried tying pin 19 to high, and my 9010a just beeps and won't turn on.  If I cut the trace the fluke turns on, but then I get a TIMEOUT error on the pod when I self test.  I would appreciate any help on this.  



On Saturday, November 9, 2013 2:32 PM, david grohowski <electronicamuse at aol.com> wrote:
 
Excellent, thanks.



david grohowski
electronicamuse at aol.com




-----Original Message-----
From: John Doe <zabanitu at mail.com>
To: techtoolslist <techtoolslist at flippers.com>
Sent: Sat, Nov 9, 2013 2:39 pm
Subject: Re: [Techtoolslist] 6800 to 6502 pod combo ROM?


eprom file is 540344
http://arcarc.xmission.com/Test%20Equipment/Fluke/6800pod/

it already contains firmware for 6800/6502 cpus.
just toggle eprom pin 19 (a10)
_______________________________________________
Techtoolslist mailing list
Techtoolslist at flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/



_______________________________________________
Techtoolslist mailing list
Techtoolslist at flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/