[Techtoolslist] Berzerk and Fluke 9010a

[Rodger Boots]

?---!!  Wouldn't a Z80 have ROM starting at 0000?
On Apr 21, 2014 2:19 PM, "Grant Thienemann" <grant.thienemann at gmail.com>
wrote:


> Hey Guys,

>

> I'm bound and determined to get my Berzerk working again. Currently I have

> it working to the point that the game will boot however the game will

> freeze randomly. List of things I have done:

>

> New sockets on the ZPU-1000 with new EPROMs and Z80 processor

> New ram sockets on the VFB-1000 and I have 4164 ram and 4116 ram that I'm

> looking into putting onto the VFB-1000.

>

> The BSC-1000 color board is fine, and the cleanest board I have on the

> machine.

>

> When I go to do the short ram check on my Berzerk board set, the 0-7FF

> fails, however the second one, 1000-17FF if I remember passes correctly.

>

> If anyone knows any tips or tricks with using the Fluke 9010a with a

> Berzerk board set I would appreciate it.

>

> Thanks

> Grant

> _______________________________________________

> Techtoolslist mailing list

> Techtoolslist at flippers.com

> http://seven.pairlist.net/mailman/listinfo/techtoolslist

> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment

> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

>