[Techtoolslist] Fluke 9010A - RS-232 & USB interface!!

[William Stillwell]

Hmm... I actually have some lantronics units.. 

Would need to see if they have a VCP Driver ( Virtual Comm Port ) , most of
them time there used like Telnet Devices, but any Ethernet->Serial that
supports VCP would work.

-----Original Message-----
From: Techtoolslist [mailto:techtoolslist-bounces at flippers.com] On Behalf Of
John Robertson
Sent: Monday, August 11, 2014 5:07 PM
To: techtoolslist at flippers.com
Subject: Re: [Techtoolslist] Fluke 9010A - RS-232 & USB interface!!

Further to this, here is a module that converts Rs-232 to Ethernet and
vice-versa...worth looking into for the 9010 and 9100?

Hope someone follows this up...

http://www.tcp232.net/tcp-ip-to-serial-module

John :-#)#

--
How to subscribe or unsubscribe from TTL
http://seven.pairlist.net/mailman/listinfo/techtoolslist
_______________________________________________
Techtoolslist mailing list
Techtoolslist at flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/