[Techtoolslist] leland off road pal dump needed u85

[Clay Cowgill]

I might still have the exact adapter.  I'll look for it Tuesday and report
back here... I can take a few pictures of it. (I might even have a Track
Pack boardset and could just read the PROM in here. I don't remember what's
our machine in storage. I'll look. If nothing else, if our PCB is the
original one just reading and duplicating that would serve as a proof of
concept.)

OE&CE can just be disconnected. Looking at the schematics all the outputs
are going to be push/pull (no tristate), so nothing 'special' required to
brute-force the dump.  (Also, two outputs are not even used.)

-Clay

-----Original Message-----
From: Techtoolslist [mailto:techtoolslist-bounces at flippers.com] On Behalf Of
tonyhtbsusa
Sent: Monday, March 16, 2015 6:17 PM
To: 'Technical Tools Mail List'
Subject: Re: [Techtoolslist] leland off road pal dump needed u85

Do you have a pinout of how you did it
Did you go from pin one to pin one
Did it matter what address line or data line went to what pin on eprom The
2716 starts at address 7 on pin 1 And data lines are split From side to side
What did you do with /oe or /ce Thanks tony