[Techtoolslist] Anybody have a simple/cheap way?

[William Stillwell]

What is funny, I looked high and low all morning and couldn't find one ( I
did find a ton of PLCC->PGA ) but not the other way...

I did just find this one :)  { Emulation Technology PLCC Emulator Pod
EP4-68-WW }

http://www.ebay.com/itm/271847943513

And snagged it up..

Exactly what I need, and it has head pins for hooking up my LA or Scope :)

Now I can hook up My Fluke 9110FT, and two 9010A(s) to a Leland offroad and
access all three processors :)





William Stillwell
Hamster / KI4SWY
Stillwell Software Solutions.
Free Play Florida Arcade & Pinball Show Organizer

-----Original Message-----
From: Techtoolslist [mailto:techtoolslist-bounces at flippers.com] On Behalf Of
John Robertson
Sent: Friday, April 24, 2015 4:50 PM
To: Technical Tools Mail List
Subject: Re: [Techtoolslist] Anybody have a simple/cheap way?

On 04/24/2015 11:50 AM, William Stillwell wrote:
> To plug a Fluke pod with a pga package to a board with PLCC ? ie, 
> PGA68 ->
> PLCC68 ? ( in this case a 80186 )
>
>   
>
>   
>
>   
>
> William Stillwell
>
> Hamster / KI4SWY
>
> Stillwell Software Solutions.
>
> Free Play Florida Arcade & Pinball Show Organizer
>
>   
>

All I can think of is using one of the cheap PLCC Eprom adapters as a
starting point...

There are a few on eBay, but they seem to start around $75.

John :-#)#
--
How to subscribe or unsubscribe from TTL
http://seven.pairlist.net/mailman/listinfo/techtoolslist
_______________________________________________
Techtoolslist mailing list
Techtoolslist at flippers.com
https://pairlist7.pair.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/