[Techtoolslist] Fluke 68000 Pod Problem

[Theron Troxel]

That did it!  Thanks for the quick response.
I had one pin that was cut in half and thought it was making a good connection.  I soldered on a little bit of an extension and now pod passed self test.
Does anyone repair these?  I have 6809 that might need some help.  I would have to test it a little bit more to make sure. 


     On Monday, July 6, 2015 2:11 PM, William Stillwell <wkstill at franz-family.com> wrote:
   

 Did you make sure the CPU cable was secured in the texttool slot on the pod?

William Stillwell
Hamster / KI4SWY
Stillwell Software Solutions.
Free Play Florida Arcade & Pinball Show Organizer

-----Original Message-----
From: Techtoolslist [mailto:techtoolslist-bounces at flippers.com] On Behalf Of Theron Troxel via Techtoolslist
Sent: Monday, July 6, 2015 3:02 PM
To: Technical Tools Mail List
Cc: Theron Troxel
Subject: [Techtoolslist] Fluke 68000 Pod Problem

Just got a 68000 and tried to self-test and comes back with "POD SELF TEST 68000 FAIL 00".  Any help with this error?
Also, does anyone fix Fluke Pods?  
_______________________________________________
Techtoolslist mailing list
Techtoolslist at flippers.com
https://pairlist7.pair.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/