[Techtoolslist] Fluke 9105

[William Stillwell]

I have a 9100 for spare parts... I could use a 9105 to maybe resurrect it 

William Stillwell
Hamster / KI4SWY
Stillwell Software Solutions.
Free Play Florida Arcade & Pinball Show Organizer

-----Original Message-----
From: Techtoolslist [mailto:techtoolslist-bounces at flippers.com] On Behalf Of
Tony Jones
Sent: Wednesday, November 11, 2015 6:00 PM
To: techtoolslist at flippers.com
Subject: [Techtoolslist] Fluke 9105

>From reading the manuals,  the 9105 has two floppies,  no hard drive and is
non-programmable.  being designed to run programs developed on the 9100.

Is the lack of programmability just due to the missing HDD and perhaps
different software load?   I looked at the service manual hoping to
find out if the SCSI interface is a card or on the mainboard but it didn't
say.

I guess I'm curious if it's possible to convert a 9105 to a 9100.
This said, I'm guessing the 9105 generally did not come with a graphics
card?

Related question;  what from a 9105 is useful - from a spare parts
perspective - for a 9100.

Thanks

Tony
_______________________________________________
Techtoolslist mailing list
Techtoolslist at flippers.com
https://pairlist7.pair.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/