[Techtoolslist] v6.1 dd image

[Steve Larkins]

I am running the image on an SD card using the scsi SD adapter made by that
cleaver Australian guy linked to and spoken about on this very list.

Make sure you have updated the BIOS chip if you are using a 9100a as the
early released did not support the software the later image was made from.

I sent John a dump of the latest firmware V1.3 for the 9100ft and it is on
the FTP.

Andy has put together a brilliant resource on his website including the
process to upgrade the ROMS.

Steve Larkins
Mobile 07826 553792

On 8 December 2015 at 06:48, Tony Jones <tony at tonyjones.com> wrote:

> On Mon, Dec 7, 2015 at 9:30 PM, Andrew Welburn <andy at andysarcade.net>
> wrote:
> > Not sure where you're getting the 100mb limit from?
>
> http://www.andys-arcade.net/personal/tech/fluke9100/index.htm
>
> task 13 ..... "and the fluke can't see anything above 100mb anyway!"
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist at flippers.com
> https://pairlist7.pair.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
>