[Techtoolslist] LCD (VGA) for 9100

[John Robertson]

Hi David (and anyone else)

The problem is I don't like to let the stuff out of the shop...so if you 
want to come up some time and play with my 9100 gear in the shop you are 
most welcome! You can test configurations, play with programming, CF 
adapters, video adapters.

I also have the test stations for many of the pods, so if you want to 
try troubleshooting your pods (in the shop) you are welcome.

Have to convert the service tapes I suspect, or did I do that back in 
the early '00s???

I don't know if I have any working 9010 tape drives left. The rubber all 
turned to goo years ago, and then Lawnmowerman (where is he?) or was it 
ArtFromNY? In any case one of those two guys found nos drive rubber 
parts and I bought some up (say around 2006), however they too have 
died. Need to rebuild them with modern neoprene Iguess, but no time!

John :-#)#

On 12/10/2015 12:03 PM, David Shoemaker wrote:
> Well John, I am in Seattle.  Not too far. :)
>
> David  :-)=
> ------------------------------------------------------------------------
> From: John Robertson <mailto:jrr at flippers.com>
> Sent: ‎12/‎10/‎2015 11:13 AM
> To: Technical Tools Mail List <mailto:techtoolslist at flippers.com>
> Subject: Re: [Techtoolslist] LCD (VGA) for 9100
>
> I have various video adapters (sell them) and can give this a try if I
> get bored which is not at all likely way as I have too many customer
> commitments this time of the year!
>
> I do wish someone in the 9100 group lived closer to me (Vancouver,
> Canada) - I'd be happy to sponsor him/her with equipment to play with to
> help develop stuff.
>
> John :-#)#
>
> On 12/10/2015 10:47 AM, William Stillwell wrote:
> > Commodore/Atari Displays are still the best option.
> >
> > I do have a nice 22" CGA/WUXGA Monitor, I should see how it looks on it.
> >
> > William Stillwell
> > Hamster / KI4SWY
> > Stillwell Software Solutions.
> > Free Play Florida Arcade & Pinball Show Organizer
> >
> >
> > -----Original Message-----
> > From: Techtoolslist [mailto:techtoolslist-bounces at flippers.com] On 
> Behalf Of
> > Tony Jones
> > Sent: Thursday, December 10, 2015 1:42 PM
> > To: Technical Tools Mail List <techtoolslist at flippers.com>
> > Subject: [Techtoolslist] LCD (VGA) for 9100
> >
> > There is a bunch of discussion in the 2012q4 archive on the subject of
> > displays.
> >
> > Curious what people in the US are using?  The Commodore/Atari 
> displays are
> > 'retro' now aka $$$.
> >
> > I have an old 15" VGA LCD and was considering getting one of the $20 
> eBay
> > HD9800/GBS-8200 converter boards mentioned in the past discussion 
> (plus of
> > course necessary sync inversion&composition)
> >
> > Anyone doing similar and happy with the end result?
> > _______________________________________________
> > Techtoolslist mailing list
> > Techtoolslist at flippers.com
> > https://pairlist7.pair.net/mailman/listinfo/techtoolslist
> > FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> > Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
> >
> > _______________________________________________
> > Techtoolslist mailing list
> > Techtoolslist at flippers.com
> > https://pairlist7.pair.net/mailman/listinfo/techtoolslist
> > FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> > Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
> >
> >
>
>
> -- 
> How to subscribe or unsubscribe from TTL
> http://seven.pairlist.net/mailman/listinfo/techtoolslist
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist at flippers.com
> https://pairlist7.pair.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/


-- 
How to subscribe or unsubscribe from TTL 
http://seven.pairlist.net/mailman/listinfo/techtoolslist