[Techtoolslist] Fluke 9100FT... Memory Size

[William Stillwell]

Or maybe figure out how to change the serial number :) 

William Stillwell
Hamster / KI4SWY
Stillwell Software Solutions.
Free Play Florida Arcade & Pinball Show Organizer


-----Original Message-----
From: Techtoolslist [mailto:techtoolslist-bounces at flippers.com] On Behalf Of
Steve Larkins
Sent: Thursday, December 10, 2015 4:02 PM
To: Technical Tools Mail List <techtoolslist at flippers.com>
Subject: Re: [Techtoolslist] Fluke 9100FT... Memory Size

Yes Will that is the case. We need an un-serialesed version of the FT
service disk.

Steve Larkins
Mobile 07826 553792

On 8 December 2015 at 14:33, William Stillwell <wkstill at franz-family.com>
wrote:

> Does one need the service disk to get it to see the full amount of ram 
> installed? My unit boots and does a test of the ram, but when the O/S 
> Loads it only sees 4mb ?
>
>
>
>
>
>
>
> William Stillwell
>
> Hamster / KI4SWY
>
> Hamster's Rom Ident: http://romident.coinopflorida.com
>
> Free Play Florida Arcade & Pinball Show Organizer
>
>
>
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist at flippers.com
> https://pairlist7.pair.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
>
_______________________________________________
Techtoolslist mailing list
Techtoolslist at flippers.com
https://pairlist7.pair.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/