[Techtoolslist] v6.1 dd image 9100a question

[William Stillwell]

I am pretty sure the 9100 won't run 9010a fide scripts :(


William Stillwell
Hamster / KI4SWY
Stillwell Software Solutions.
Free Play Florida Arcade & Pinball Show Organizer


-----Original Message-----
From: Techtoolslist [mailto:techtoolslist-bounces at flippers.com] On Behalf Of
tonyhtbsusa
Sent: Monday, December 28, 2015 12:03 AM
To: 'Technical Tools Mail List' <techtoolslist at flippers.com>
Subject: Re: [Techtoolslist] v6.1 dd image 9100a question

I have a question I am new to the 9100a
My fluke 9010a has serial and fide to make scripts and send them over to it
Works great

I just upgraded my fluke 9100a to a sd to scsi adapter
 
http://www.codesrc.com/mediawiki/index.php?title=SCSI2SD#Alternative_Open_SC
SI_Projects
Upgraded roms from andys site
http://www.andys-arcade.net/personal/tech/fluke9100/index.htm
No keyboard no video card
Flashed the sd card with 6.1 dd image on 256meg sd from andys site 

  v6.1 software and v6.1 editor  . Its a bare-bones install of software and
pod libraries, no user programs or UUT's provided.

9100a passes mem test and boots
I Can do a self test with my 6502 pod and passes How do I get it to load and
run a scrip ?
Can I send data to it from fide over serial ?
Can I make a script in fide and save it to disk ? and load it in 9100a if so
how ?
Am I missing something
Tony
Hi-tech 







-----Original Message-----
From: Techtoolslist [mailto:techtoolslist-bounces at flippers.com] On Behalf Of
Steve Larkins
Sent: Tuesday, December 8, 2015 11:36 AM
To: Technical Tools Mail List
Subject: Re: [Techtoolslist] v6.1 dd image

I am running the image on an SD card using the scsi SD adapter made by that
cleaver Australian guy linked to and spoken about on this very list.

Make sure you have updated the BIOS chip if you are using a 9100a as the
early released did not support the software the later image was made from.

I sent John a dump of the latest firmware V1.3 for the 9100ft and it is on
the FTP.

Andy has put together a brilliant resource on his website including the
process to upgrade the ROMS.

Steve Larkins
Mobile 07826 553792

On 8 December 2015 at 06:48, Tony Jones <tony at tonyjones.com> wrote:

> On Mon, Dec 7, 2015 at 9:30 PM, Andrew Welburn <andy at andysarcade.net>
> wrote:
> > Not sure where you're getting the 100mb limit from?
>
> http://www.andys-arcade.net/personal/tech/fluke9100/index.htm
>
> task 13 ..... "and the fluke can't see anything above 100mb anyway!"
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist at flippers.com
> https://pairlist7.pair.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
>
_______________________________________________
Techtoolslist mailing list
Techtoolslist at flippers.com
https://pairlist7.pair.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

_______________________________________________
Techtoolslist mailing list
Techtoolslist at flippers.com
https://pairlist7.pair.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/