[Techtoolslist] v6.1 dd image 9100a question

[tonyhtbsusa]

Thank you Andrew
That is the direction I needed
I was thinking they were the same family

Ok I can build the keyboard adapter
Anyone have a video card for sale
Or can I use any sub 

I will get on that manual for programming 
Tony hi-tech



-----Original Message-----
From: Techtoolslist [mailto:techtoolslist-bounces at flippers.com] On Behalf Of
Andrew Welburn
Sent: Monday, December 28, 2015 2:44 AM
To: Technical Tools Mail List
Subject: Re: [Techtoolslist] v6.1 dd image 9100a question

The 9100 is not a script-based system. Disregard anything you learned about
scripting on the 9010, it's not transferable. Would you try to load Mac
programs on a PC? Same sort of analogy here, 9010 stuff is a totally
different system, they don't share anything.

When you get a video card and keyboard, you will open up to the wonderful
world of the TL/1 programming language which is far more powerful, and
useful than any scripts :) 

Until then, do like I did for the first 4-5 years of being a 9100 owner, get
trick with every function through the operators keypad.

Yes you can use your 6502 pod with it, the image contains all pod libraries
and software needed for any pod to be used on the system.

It's an old but familiar piece of advice, but - read the manuals. Seriously
do, you have to, to get your head round how it works, and how you can use
it.

Enjoy!

Andrew Welburn (mobile)
www.andys-arcade.com

> On Dec 27, 2015, at 9:03 PM, tonyhtbsusa <tony at htbsusa.com> wrote:
> 
> I have a question I am new to the 9100a My fluke 9010a has serial and 
> fide to make scripts and send them over to it Works great
> 
> I just upgraded my fluke 9100a to a sd to scsi adapter
> 
> http://www.codesrc.com/mediawiki/index.php?title=SCSI2SD#Alternative_O
> pen_SC
> SI_Projects
> Upgraded roms from andys site
> http://www.andys-arcade.net/personal/tech/fluke9100/index.htm
> No keyboard no video card
> Flashed the sd card with 6.1 dd image on 256meg sd from andys site
> 
>  v6.1 software and v6.1 editor  . Its a bare-bones install of software 
> and pod libraries, no user programs or UUT's provided.
> 
> 9100a passes mem test and boots
> I Can do a self test with my 6502 pod and passes How do I get it to 
> load and run a scrip ?
> Can I send data to it from fide over serial ?
> Can I make a script in fide and save it to disk ? and load it in 9100a 
> if so how ?
> Am I missing something
> Tony
> Hi-tech
> 
> 
> 
> 
> 
> 
> 
> -----Original Message-----
> From: Techtoolslist [mailto:techtoolslist-bounces at flippers.com] On 
> Behalf Of Steve Larkins
> Sent: Tuesday, December 8, 2015 11:36 AM
> To: Technical Tools Mail List
> Subject: Re: [Techtoolslist] v6.1 dd image
> 
> I am running the image on an SD card using the scsi SD adapter made by 
> that cleaver Australian guy linked to and spoken about on this very list.
> 
> Make sure you have updated the BIOS chip if you are using a 9100a as 
> the early released did not support the software the later image was made
from.
> 
> I sent John a dump of the latest firmware V1.3 for the 9100ft and it 
> is on the FTP.
> 
> Andy has put together a brilliant resource on his website including 
> the process to upgrade the ROMS.
> 
> Steve Larkins
> Mobile 07826 553792
> 
>> On 8 December 2015 at 06:48, Tony Jones <tony at tonyjones.com> wrote:
>> 
>> On Mon, Dec 7, 2015 at 9:30 PM, Andrew Welburn <andy at andysarcade.net>
>> wrote:
>>> Not sure where you're getting the 100mb limit from?
>> 
>> http://www.andys-arcade.net/personal/tech/fluke9100/index.htm
>> 
>> task 13 ..... "and the fluke can't see anything above 100mb anyway!"
>> _______________________________________________
>> Techtoolslist mailing list
>> Techtoolslist at flippers.com
>> https://pairlist7.pair.net/mailman/listinfo/techtoolslist
>> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
>> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist at flippers.com
> https://pairlist7.pair.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
> 
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist at flippers.com
> https://pairlist7.pair.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
_______________________________________________
Techtoolslist mailing list
Techtoolslist at flippers.com
https://pairlist7.pair.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/