[Techtoolslist] Fluke 9100 probe

[Douglas Gauck]

It is taller than it is wide, and it does have ‘Fluke’ molded onto the handle, and the circuit board inside does have ‘ASSY 755561’ which is what led me to think it was for the 9100.

My 9010 probe has a sticker mid-handle that has the Fluke logo and ‘9000A probe’.

The one is question doesn’t have a sticker or any spot from which a sticker could be missing.

-DrG


> On Jan 5, 2016, at 4:41 PM, Tony Jones <tony at tonyjones.com> wrote:
> 
> That's not an official 9100 probe,   not fat enough. Does have correct DB15
> on end, maybe someone rewired a scope probe.  Fluke probe is clearly marked
> 9100A-PROBE
> On Jan 5, 2016 1:36 PM, "Douglas Gauck" <douglasgb at mac.com> wrote:
> 
>> I just identified an orphaned probe I’ve had in storage for a while now
>> and believe it’s for the 9100. See here:
>> 
>> http://www.gauck.com/arcade/fluke/9100probe.jpg <
>> http://www.gauck.com/arcade/fluke/9100probe.jpg>
>> 
>> I have a 9010 with its probe, so I don’t need this (unless you all think I
>> should sell the 9010 and get the 9100!)
>> 
>> Anyone need it? Any idea what it’s worth?
>> 
>> -Douglas
>> _______________________________________________
>> Techtoolslist mailing list
>> Techtoolslist at flippers.com
>> https://pairlist7.pair.net/mailman/listinfo/techtoolslist
>> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
>> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist at flippers.com
> https://pairlist7.pair.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/