[Techtoolslist] Fluke 9100a & 9100ft VGA modification

[Tony Jones]

"The following are instructions on upgrading the video card from RGB\H\V
(Inverted sync) to VGA standard"

1. I don't believe you are upgrading the video card to VGA standard.  That
would be quite the feat plus why would you need the external conversion
board?

2. You don't explain what is the purpose of the various jumpers and cuts.
If it is just to negate and combine the sync, since you already have an
external enclosure housing the GBS8220 which is being fed 5vdc why not just
use a 7400 to handle this and not hack your video card?
On Jan 12, 2016 2:15 PM, "Steve Larkins" <steve at ukaudiovisual.co.uk> wrote:

> Hello list
>
> I just spent the last couple of evening working on modifying my 9100ft to
> colour VGA after years of using the fluke black and white monitor.
>
> I have documented how I have done it on my website here:
>
> https://sites.google.com/a/boomspace.co.uk/poachersropeworkshop/test-equipment/logic-testers/fluke/9100a-9100ft-9110a
>
> I have also documented how I replaced the SCSI hard drive with the SCSI2SD
> adapter.
>
> Many thanks to Martin White and Andrew Welburn for their previous work and
> assistance.
>
> Cheers
>
> Steve Larkins
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist at flippers.com
> https://pairlist7.pair.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
>