[Techtoolslist] Tape for Fluke async clock probe

[William Stillwell]

I had copied those up to my site when they were offline on TTL, are they back up on TTL now? If so, I can pull them down ( or leave as they are now google indexed ) 



William Stillwell
Hamster / KI4SWY
Stillwell Software Solutions.
Free Play Florida Arcade & Pinball Show Organizer


-----Original Message-----
From: Techtoolslist [mailto:techtoolslist-bounces at flippers.com] On Behalf Of John Robertson
Sent: Monday, January 18, 2016 11:07 PM
To: Technical Tools Mail List <techtoolslist at flippers.com>
Subject: Re: [Techtoolslist] Tape for Fluke async clock probe

On 01/18/2016 7:18 PM, Ian Eure wrote:
> Does anyone have a good, complete dump of the tape that came along with the async probe for the Fluke 9010a? I have a console with the async clock module, and the probe, but no copy of the tape, which is needed to tun it.
>
> I've found a few dumps[1][2][3], but they all appear to be incomplete. Per the manual[4], the tape has two sides, but I don’t see any dumps of side B. All three of the side A dumps are missing programs 12-18, they only have “<BINARY>” placeholders. These seem to be the programs which actually drive the async probe, so it seems unlikely that it would operate without them. Perhaps binary data can’t be transferred via the serial port? I’ll be very annoyed if that’s the case, since working tape drives are rare and I don’t think anybody has figured out how to repair them.
>
> [1]: 
> http://www.coinopflorida.com/fluke/9010A%20Arcade%20Scripts/async.s
> [2]: 
> http://www.coinopflorida.com/fluke/9010A%20Arcade%20Scripts/SA-async.s
> [3]: 
> http://www.coinopflorida.com/fluke/9010A%20Arcade%20Scripts/ASYNC-R.S
> [4]: 
> http://arcarc.xmission.com/Test%20Equipment/Fluke/9000/9000A-006%20Asy
> nc%20Probe1.pdf
>

Those appear to be downloads from the TTL FTP site. The last time I tried to extract the data was 2002, and as I had no real use for the Async I never tried again.

Look for a file called SA-ASYNC.H - that is on the TTL FTP site under Fluke/9010%20Scripts - I think that is the HEX file copy I made back in 2002...note that it is stored in ASCII, so you can upload it via the RS-232/USB/etc port.

John :-#)#
--
How to subscribe or unsubscribe from TTL http://seven.pairlist.net/mailman/listinfo/techtoolslist

_______________________________________________
Techtoolslist mailing list
Techtoolslist at flippers.com
https://pairlist7.pair.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/