[Techtoolslist] Restoring Old Console Plastic...

[John Robertson]

On 02/20/2016 2:06 PM, Jess Askey wrote:
> Hey everyone...
>
> Seems like there has been lots of information out there for a few years on how to use Peroxide based bleaches along with UV in order to remove the 'yellow' from old plastics. I decided to try this on my 9010A because it had been sitting idle for quite a long time in the sun of Colorado and was pretty badly yellowed... Attached is a before and after photos if you are interested... it took me about 4 hours to do this and I would say the results are pretty good. I did have to do some extra steps as the peroxide cream I used (I had the '20%' strength version from Sally Beauty supply, and probably should have tried to find the 40% cream instead) left sort of a mottled bleaching pattern... I ended up bleaching with the peroxide cream twice with a total time in the sun of about 5 hours. Afterwards, definitely some improvements but it is inconsistent and actually didn't look that great. I still had some deep yellow areas. I decided to pull out the acetone at that point to see if I could potentially blend in the differences and it actually just seemed to strip off the yellow layer quite nicely. I used paper towels and acetone a few time to get things looking good, then some Novus plastic polish and that was where I stopped.
>
> Anyway, looks much nicer... time to try it on my Data IO 29B now!
>
>
Hmm, seems to me you are just removing the protective dirt! You should 
see my motorcycle!

Nice job though, next the pods!

Oh, and if you want to post pictures etc. please try to limit the 
message size to 2mb, otherwise the system asks me to authorize the msg. 
I am still restricting the size of messages in case some folks are still 
on dial-up (OK, that is unlikely these days!)...

John :-#)#

-- 
How to subscribe or unsubscribe from TTL 
http://seven.pairlist.net/mailman/listinfo/techtoolslist