[Techtoolslist] replacing flat cables/connectors

[Tony Jones]

On May 19, 2016 8:14 AM, "John Robertson" <jrr at flippers.com> wrote:

> Or you can make the UUT header with a VERO board or similar and a couple
of
> rows of double-sides 0.100" header pins, etc.

Hi John

This topic was discussed in depth on the KLOV site. Consensus there was
that .100 header pins (being significantly wider than the pins on Fluke
probe heads or the "dip plugs") can result in poor socket pin contact.

Best

Tony