[Techtoolslist] 9010 fan question

[Art]

You can always paypal me a $20 bill and I can send you a working tested fan
......

Art

-----Original Message-----
From: Techtoolslist [mailto:techtoolslist-bounces at flippers.com] On Behalf Of
Tony Jones
Sent: Thursday, July 14, 2016 2:11 PM
To: John Robertson; Technical Tools Mail List
Subject: Re: [Techtoolslist] 9010 fan question

On Thu, Jul 14, 2016 at 10:43 AM, John Robertson <jrr at flippers.com> wrote:

> Depending the fan design there may be a removable rubber seal under 
> the fan label (if in the middle of the fan). I peel back the label, 
> remove the seal and then put a couple of drops of synthetic motor oil 
> (around 20W) and let it soak in a while then spin the fan manually 
> back and forth to work the it back into the bushings. Then seal it back
up.

No, not on this fan.
_______________________________________________
Techtoolslist mailing list
Techtoolslist at flippers.com
https://pairlist7.pair.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/