[Techtoolslist] 9010 fan question

[Tony Jones]

Seems fully sealed front back to me.  I just kindly took up Art on his
offer. Easy peasy.  Appreciate your "i'm trying to not treat you like a
blithering idiot" :-)

Thanks

Tony
On Jul 14, 2016 12:55 PM, "Jess Askey" <jess at askey.org> wrote:

>
> Sometimes the label is on the mounted side of the fan so you have to take
> it out to see it. Apologies if you already did that... I support technology
> in my day job (I'm 'working' as I type this) so at least I didn't ask you
> if your computer was plugged in. 😃
>
>
>
> -------- Original message --------
> From: Tony Jones <tony at tonyjones.com>
> Date: 7/14/16 12:10 PM (GMT-07:00)
> To: John Robertson <jrr at flippers.com>, Technical Tools Mail List <
> techtoolslist at flippers.com>
> Subject: Re: [Techtoolslist] 9010 fan question
>
> On Thu, Jul 14, 2016 at 10:43 AM, John Robertson <jrr at flippers.com> wrote:
>
> > Depending the fan design there may be a removable rubber seal under the
> fan
> > label (if in the middle of the fan). I peel back the label, remove the
> seal
> > and then put a couple of drops of synthetic motor oil (around 20W) and
> let
> > it soak in a while then spin the fan manually back and forth to work the
> it
> > back into the bushings. Then seal it back up.
>
> No, not on this fan.
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist at flippers.com
> https://pairlist7.pair.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist at flippers.com
> https://pairlist7.pair.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/